Feature
●"Special Cooling Design:" Raspberry Pi 2 fan case is made of 100% aluminum alloy material, efficient heat transfer and easy installation. The shell body with stripe design helps to cool the motherboard
●"Excellent Heat Dissipation:" Built-in 4 thermal conductive columns (with 4 heat sinks) and dual cooling fans can solve the heating problem of your Pi 4B motherboard quickly and effectively
●"Slot Size Patchry:" The shell slot and port size are designed to be accurate and the open design will not affect the transmission of wifi/bluetooth signal
●"Easy Access: " Allows access to consumer ports and GSI, camera and Gpio connectors. It also has interfaces such as GPIO, CSI, DSI, POE, 40 pins, and will not interfere with other use
●"Case for Raspberry Pi 4B:" Designed for Raspberry Pi 4 Mode B. (Raspberry Pi 4 Model B not included)
Description
Details of Dual Cooling System
SunFounder Raspberry Pi 4 Case for Raspberry Pi 4 Board This dual fan aluminum heatsink case is made of aluminum alloy material, portable and accurate slot size, only provide excellent heat dissipation for Raspberry Pi 4 board. It comes with 4 thermal pads that provide thermal contact between the CPU and the top case, as well as a convenient hex wrench and a set of hex bolts for attaching the case together.
Dual Fan Specifications
Dimensions: 1.0 x 1.0 x 0.2 inches (25 x 25 x 07 mm); Rated Voltage: DC 5 V; Operating Voltage Range: DC 3.5 V; Rated Current: 0.08 A±0.01 A; Stall Current: 0.50 A; Rated Power: 0.4 W±0.1 W; Speed: 7500R.P.M. ±10 Air Flow: 6.21 CFM; Static Pressure: 1.22 MMH2O; Noise: 19.28 dB (A); Average Lifetime: 30,000 h; Rotation Direction: Counterclockwise / CCW
Test Effect
Test Results
It protects the Raspberry Pi 4 and provides the best passive cooling as seen in extensive tests and provides passive cooling from 20 to 30 °C at full CPU loads.
Multiple interface design
Multiple interface for Raspberry Pi 4B
SunFounder Raspberry Pi 4 Aluminum Case allows access to all ports, pins and connectors. Ports such as GPIO, CSI, DSI, POE, 40 pin are reserved and these ports do not block any other use. The shell slot and port size are designed to be accurate and the open design will not affect the transmission of wifi/Bluetooth signal.
Packing List:
1 x Aluminum Alloy Heat Sink 1 x Dual Cooling Fan 4 x 3W Silicone Pad (Different Sizes) 14 x M2.5 x 10 Screw Driver 1 x Installation Manual
Note: Before installing the enclosure, please make sure your Pi is power off and unplugged.