Feature

●Charging Note: Please do not charge your wife after the battery port has been used. If the battery runs out and cannot start charging the stationary wavemeter, the red LED indicator on the charging port will be dim. Please do not unplug the charging plug. After a few minutes, plug and unplug the charging plug several times. When the charging light is reached to normal brightness, it will normally be charging state
●Charging Indicator: The charging LED indicates that it will always turn on when charging and off after charging. When the input overvoltage, output lack voltage and overvoltage, output short circuit, charging time time-out, it will flash at 1.6hz frequency
●Hardware: Organic Emitting Diode Mini Stationary Wavemeter hardware features 2.23 inch 128x32 resolution orange color organic luminescent diode screen as a display screen, and an AVR mega32, MCU, 350 mA capacity built-in polymer lithium battery and 8.4V, 5V (Micro USB) charging. The stationary wave detector has three magnetic ring detection circuits and an M-type (sl16) connector
●Software: Organic Light Emitting Diode Mini Stationary Wave Meter Software 1024 point interpolation algorithms correct the non-linearity of the diode and include the ability to display constant waves, peak forward power PF, peak reverse power PR, average forward power AF and average reverse power It simultaneously powers the Ar. The working frequency is 1.6-30MHz, the maximum measurement power is 100W
●Display: When the stationary wave meter is activated, the world map is first displayed, then the version number and percentage of the battery voltage, enter the main measurement interface. At this point, the constant wave and the corresponding power value will be displayed


Description

1.Software: Organic Light Emitting Diode Mini Stationary Wavemeter Software The 1024 point interpolation algorithm corrects the non-linearity of the diode, providing constant waves, peak forward power PF, peak reverse power PR, average forward power AF, and at the same time average reverse power Ar The working frequency is 1.6-30MHz, the maximum measurement power is 100W.
2. Hardware: The hardware of the organic luminescent diode mini stationary wave meter adopts 2.23 inch 128x32 resolution orange color organic luminous diode screen as a display screen, AVR mega32, MCU, 350 mA capacity built-in polymer lithium battery and 8.4V, 5V (Micro USB) charging. The stationary wave detector has three magnetic ring detection circuits and an M-type (sl16) connector.
3. Display Contents: Once the stationary wave meter is activated, the world map will appear first, then the version number and percentage of the battery voltage, enter the main measurement interface. At this point, the constant wave and the corresponding power value will be displayed.
4. Charging indicator: Charging LED indicates that it will always turn on when charging and off after charging. Flashes at 1.6hz frequency for input overvoltage, output short-circuit, and charging time time time out
5. Charging Notes: Please do not charge your wife after the battery port is running out. If the battery runs out and cannot start charging the stationary wavemeter, red on the charging port