Feature

●【Upgraded Vector Network Analyzer】This NanoVNA F V2 vector network analyzer uses an ultra-wide viewing angle of 4.3-inch IPS LCD display, which is not harmful to your eyes. Full touch screen design, three side buttons at the same time, flexible and convenient operation. The RF front end is designed with metal shielding and the S21 dynamic range is over 80dB in full frequency range
●(50KHZ-3000MHZ Frequency Range) This portable spectrum analyzer is expanded to 50KHz-3000MHz, and has improved dynamic range up to 80dB. Can be used to debug the duplex more accurately. It can measure S parameters, voltage constant waveratio SWR, phase diagram, group delay, smith charts and more. RF interface is SMA and convenient to connect various components to be tested
●【Multi-function】This VHF SWR meter is based on OwOComms S A 2 design to test the antennas constant wave and impedance, insertion loss, filter isolation and constant waves, cable attenuation, shortening rate and phase and amplification of the antenna amplifier. It has a frequency meter function, so you can measure the length of the cable
●【Safe Power Supply】This antenna analyzer has a built-in 5000mAh lithium ion battery, which can provide up to 7 hours standby time. Adopts high current 2A charging IC to reduce charging time and extend the 5V 1A USB output interface. Support Chinese and English interface, adjust the brightness of the screen and support the top computer
●100% Quality Assurance: Effectively shields electromagnetic interference to ensure accurate measurements. We are confident in the quality of this NanoVNA Vector Network Analyzer and offer a 12 month warranty or refund. If you have any questions about your purchase, please feel free to contact us. We will solve your problem within 24 hours


Description

1. Test Range: Vector network analyzers are based on OwOComms SA A2 design, which can test antenna constant wave and impedance, filter insertion loss, insulation and constant waves, cable attenuation, shortening coefficient and phase and amplification. Antenna Amplifier
2. Frequency Meter Function: The network analyzer has a frequency meter function, which can measure the length of the cable. Group time delays are strong. Most importantly, you can debug the uv band frequency duplexer. Effective shielding electromagnetic interference to ensure measurement accuracy.

Specifications:
Item Type: Vector Network Analyzer
Model: NanoVNA F V2
Material: Aluminum Alloy, LCD
Screen: 4.3" IPS TFT 800x480
Measuring frequency range: 50KHz-3000MHz
RF Output Power: -9dbm (Errors within 1GHz: Positive or negative 1db)
Frequency accuracy: <0.5ppm
S21 Dynamic Range: 70dB (1.5GHz), 60dB (3GHz)
S11 Dynamic Range: 50dB (1.5GHz), 40dB (3GHz)
2 Port Return Loss: 20dB Typ (1.5GHz), 13dB Min. (3GHz)
USB Interface: USB Type C Communication Mode: CDC (serial)
Ki