Feature

●50 KHz - 1.5 GHz: The improved frequency algorithm can be used to support a measuring frequency of up to 1.5 GHz. The direct output frequency range of 50k-300MHz of si5351 provides dynamics above 70dB. The extended 300M-600MHz band provides dynamics above 50dB and the 600M-900M band provides dynamics above 40dB
●Simple and Practical PC Control Software: This VNA uses the design of edy55, and has been redesigned with some circuitry, increased battery management system (BMS) circuit, and redesigned the PCB. Touchstone (snp) files are PC soft and suitable for various radio design and simulation software. We designed this easy and practical PC control software to export it. Simple calibration kit is included as well as the vector network analyzers on the market. After proper calibration, you can get high accuracy before use. High stability, sensitivity, and accuracy greatly improves performance. Please refer to the Japanese instruction manual for details. Please feel free to contact the seller if there is any need. )
●【Vector Network Analyzer】 Provides TX/RX measurement to determine the complete S11 and S21 parameters. If you need to get S12 and S22, you need to change the wiring for the transceiver port manually
●Product Specifications: Voltage: 5 V/Size: 5.9 x 3.1 x 0.8 inches (150 x 80 x 20 mm); Weight: 0.4 lbs (0.16 kg). Made of high quality PCB and acrylic material, it is practical and long lasting
●【Package List】1 x NanoVNA (with 450mA battery), 1 x USB Type-C data cable, 2 x 30mm SMA male to male cable, 1 x SMA male calibration kit (open/short/load), 1 x SMA female to female connector


Description

Technical Parameters:
Display: 2.8 inch TFT (320 x 240)
RF Output: 0 dbm (±2 dbm)
Port SWR: <1.1
PCB: 2.0 x 2.7 x 0.4 inches (50 x 68 x 10 mm).
Measuring frequency: 10kHz - 1.5GHz
Measuring range: 70 dB (50 KHz - 300 MHz), 60 dB (300 MHz - 900 MHz), 40 dB (900 MHz - 1.5 MHz). Enable extended firmware
USB Interface: USB TYE - C
Communication mode: CDC (serial)
Power Supply: USB 5V 120 Ma, battery is supplied, and can be used with a maximum charging current of 0.8 A (including battery).
Number of tracks: 101 (fixed)
Display tracking: 4, marking: 4, storage setting: 5.

Package List:
1 x NanoVNA
1 x USB Type-C Data Cable
2 x 30mm SMA Male to Male Cable
1 x SMA Male Calibration Kit (Open/Short/Load)
1 x SMA Female to Female Connector