Feature

●2.4 inch tft screen, display 320*240 pixels, you can see the data more clearly and improve your experience
●Single point measurement interface using 4 interfaces to start and input the machine by default, scan, system information, correction, calibration, and a single point measurement interface
●Usage Suggestion: To ensure accuracy of measuring and calibration, the device must be preheated for at least 15 minutes. Try using high quality RF cables and connectors. Calibration cables marked as the next May do not require direct calibration and use
●Before measuring and calibration, make sure you are not exposed to strong wireless signal caused by inaccurate measurements
●The process of testing the wire rope will affect the measurement accuracy. If possible, we recommend not to choose too long test wire rope


Description

Specifications:
Material: Abs
Color: Black
Battery: 1 x Lithium battery, 2000 mAh (included)
Frequency: 34.375MHz-2.7gHz
Spacing: 1 kHz
Charging Current: 400mA
Auto Power Off: Adjustable (still on, 5 - 60 minutes)
Measure Facts: Resistance, Reactance, SWR, S11
Resolution ratio: 4-bit effective numbers
Frequency accuracy: ± 5ppm
Connector: SMA-K
Measuring range:
Impedance: 0.1 - 1000 (impedance absolute value)
SWR: 1.000 - 65
S11 (DB): 0db to -60db
Error (single point measurement):
<; Impedancex 3%±0.1 absolute value (z 200, 1.5gHz)
<; Effective ReadingX10%±0.1
S11(dB /°): 0.1 dB /5° (0dB to -10dB), 1 dB /10° (-10dB to -20dB), 5dB /20° (-20dB to -40dB)
<;35DB(Hz~2GHz after 35m calibration); 30DB(2gHz ~ 2.7GHz)
Scan Point: 280
Output Level: -18dBm
Working temperature: 0 - 40
Atmospheric Pressure: 860 HPA - 1060 HPA
Package Size: 5.9 x 4.0 x 1.5 inches (150 x 102 x 37 mm).
Package weight: 10.3oz (293g)

Package Contents:
1 x Antenna Analyzer Set