Feature

●4.3" IPS LCD Touch Screen: The NanoVNA F V2 Vector Network Analyzer features a 4.3" IPS LCD display with an ultra-wide viewing angle, so it will not harm your eyes even after long time use. Network analyzer is expanded from 50KHz to 3000MHz, and the dynamic range is up to 80dB
●Testing Range: Vector network analyzers are based on OwOComms SA A2 design, which can test the antennas constant wave and impedance, filter insertion loss, insulation and constant waves, attenuation, shortening coefficient, and cable phase
●5000MAH Li-ion Battery: The antenna analyzer has a built-in 5000mAh lithium-ion battery that can stand by up to 7 hours. Adopts high current 2A charging IC, which reduces charging time and extends the 5V 1A USB output interface. Support Chinese and English interface. Can be used to debug the duplex more accurately. It can measure S parameters, voltage constant waveratio SWR, phase diagram, group delay, smith charts and more
●Metal Block: Touch screen antenna analyzer is robust and durable. The RF front end is designed with metal blocks, so the S 21 dynamic range is better than 80dB over the entire frequency range. The RF interface is SMA which is convenient for connecting various components
●After-sales service:If you have any suggestion or question about our products, please contact us immediately. We will solve your problem within 24 hours


Description

Function:
1. Frequency Meter Function: The network analyzer has a frequency meter function, which can measure cable length, strong group time delay. Most importantly, the UV band frequency duplexer can also be debugged. Effectively shields electromagnetic interference to ensure measurement accuracy.
Specifications:
Item Type: Vector Network Analyzer
Model: NanoVNA F V2
Material: Aluminum Alloy, LCD
Screen: 4.3" IPS TFT 800x480
Measuring frequency range: 50KHz - 3000MHz
RF output power: -9dbm (within 1GHz: positive or negative 1db)
Frequency accuracy: <0.5ppm
S21 Dynamic Range: 70dB (1.5GHz), 60dB (3GHz)
S11 Dynamic Range: 50dB (1.5GHz), 40dB (3GHz)
2 Port Return Loss: 20dB Standard (1.5GHz), 13dB Min. (3GHz)
USB Interface: USB Type C Communication Mode: CDC (serial)
Number of calibration points: 101 pt.
Number of Scan Points: 101 pt.
Display Tracking: 4 traces
Scan time: approx. 1.9 seconds per time (50kHz ~ 3000MHz full frequency band)
Battery Type: 5000mAh Li-ion battery (built-in)

Package List:
1 x Vector Network Analyzer
2 x SMA JJ RG405 Connecting Cable
6 x SMA Adapters
1 x Stylus
1 x Type C Cable
1 x Instruction
1 x Storage box.