Feature(may vary by option.)

●1. Full body forged gun
●2. FORTABLE operation, lightweight
●3. Fixed 0 PSI for high pressure spray 450.
●4. Easy to reassemble filter
●5. Easy to clean

[set2]




[Set3]




[set1]





Description

There are 3 options:

Set 1: 818A High Pressure Airless Spray Gun x 1

Set 2: 15 meters high pressure hose x 1

Set 3: 818A High Pressure Airless Spray Gun x 1

1 x 49.2 ft (15 m) high pressure hose

818A High Pressure Airless Spray Gun Technical Data

Product Parameters

Type: Airless Spray Gun

Material: Stainless Steel

Coverage: Latex Paint Spray Gun

Spray distance: 11.8 inches (300 mm)

Spray Width: 9.8 - 12.2 inches (250 - 310 mm)

Feed Connector: 1 / 4-18NPSM

Paint Supply Method: Pressure Transfer Type

Paint Discharge: 2,000 (ML/S)

Product Aliases: Airless Spray Gun

Use: Gun for spray guns.

Weight: 750g

Total Length: 8.3 inches (210 mm)

Overall Width: 5.0 inches (128 mm).

Max WPR: 3600PSI 24.8 Barbar

Airless Spray Tips

Model: 517 (0.43mm)

Max Pressure:

→ 34.5 MPa

→5000 PSL

→ 345 Bar

Size (L x H): 2.0 x 2.2 inches (5 x 5.5 cm).

Tungsten steel forged, easy to wear, durable

Features
1. Full body forged gun
2. FORTABLE operation, lightweight
3. Fixed 0 PSI for high pressure spray 450.
4. Easy to reassemble filter
5. Easy to clean
Application Coating
Colorant, varnish, oil-based paint, chlorinated rubber, water-based paint, high viscosity latex paint
Application Scope
Suitable for spraying jobs such as marine, locomotive engine, rolled inventory, chemical equipment, construction exterior walls, steel structure and more.

INSTRUCTIONS FOR USE

1. We deleted the paint to ensure that there are damage that need to be replaced immediately.

2. The air pressure of the air tube will have air pressure to the end of the air inlet connection. You must check the air outlet and each one. Regardless of whether you have a part of the connection leakage.

3. According to the paint quality requirements required to adjust the application of the paint gun.

Maintenance Instruction

1. Tools from the tool air inlet: Fill 3 - 4 drops of special cleaning oil to reduce wear and extend the service life of the tool.

2. No impurities to ensure the supply of the gas source tools is dry

3. Cleaning parts and gas maintenance, timely replacement of parts

Description of 15 meters high pressure hose

Features:
-15M 1/4" Airless Sprayer High Pressure Pipe Fitting
- Bearing pressure, pulse superior performance, composite tube for solid
- The tube is lightweight and easy to carry. Small liquid resistance, volume expansion is small, does not affect pressure.
- It is easily affected by high pressure, no curling, and flexible.
- Increases safety factor to prevent inner conductive strip sandwiches, physical damage, mechanical damage and other potential leakage.
Corrosion resistance for corrosion, corrosion resistance to adapt to all types of paints
- Use and adjust the evenness to slowly adjust due to sudden pressure increases damage to the tube.
Specifications:
Product Name: Spray Hose
Length: 15 meters
Max W.P: 3300 PSI-228Bar
Maximum Temperature: 145°F (65°C).
Weight: 6.9 oz (1,860 g).