Feature

●★1.Cleans molds, forging, casting parts, welding parts, heat treated parts, stamping parts, and machined parts
●★2.Surface roughness, scale removal, residual salt, burr, electroplating, pre-treatment before ejection Carbide, post-processing
●★3.Spray glass pills, plastic sand and reinforced surface components
●★4.There is a large transparent observation window, you can use the double pen to polish different hardness materials
●★5.Two iron cups are more durable, sand blasting force, stable and accurate operation, convenient to repair


Description

★Specifications★

Power Supply: 110 V / 220 V 50 / 60 Hz.

Power: 50W

LED Power: 25W

4kg or more pressure

Sand granularity: ≥120 mesh.

Size:47*44*31cm

Weight: 39.7 lbs (18

★Use★

1. Connect all pipes and accessories to a corresponding outlet.

2. Install the sandblast valve and insert the air tube (pressure>4 kg/cm and the supply volume is larger than 80 L/min.

3. Put quartz sand (120 eyes) into the machine. We recommend sand in the container is smaller than the capacity of the container. ½

4. Turn on the right lamp and power up.

5. Fill the studio from the observation window. Place casting side by side. The distance between the cast and nozzle should be within 0.4 inches (10 mm).

6. Step on the foot switch to activate the spray. Sand sprays out from the nozzle. Pull or push the black button on the right side to control the spray sand. )

7. Once the casting surface is polished, keep your foot away from the foot switch. Sand stops spraying. Open the observation window and remove the polished cast. Turn off the power after use.