★Specifications★
Power Supply: 110 V / 220 V 50 / 60 Hz.
Power: 50W
LED Power: 25W
4kg or more pressure
Sand granularity: ≥120 mesh.
Size:47*44*31cm
Weight: 39.7 lbs (18
★Use★
1. Connect all pipes and accessories to a corresponding outlet.
2. Install the sandblast valve and insert the air tube (pressure>4 kg/cm and the supply volume is larger than 80 L/min.
3. Put quartz sand (120 eyes) into the machine. We recommend sand in the container is smaller than the capacity of the container. ½
4. Turn on the right lamp and power up.
5. Fill the studio from the observation window. Place casting side by side. The distance between the cast and nozzle should be within 0.4 inches (10 mm).
6. Step on the foot switch to activate the spray. Sand sprays out from the nozzle. Pull or push the black button on the right side to control the spray sand. )
7. Once the casting surface is polished, keep your foot away from the foot switch. Sand stops spraying. Open the observation window and remove the polished cast. Turn off the power after use.