Uses COB chip.
7600LM (1 Side 3,800 LM) COB 12V - 24V LED Bulb, Set of 2
COB stands for Chip On Board.
LED for uniform surface illumination.
The luminescent surface is wide, and has no unevenness of light, high output, and high luminous flux.
Built-in cooling turbo fan
Equipped with a high speed cooling and silent fan with 12,000 rpm.
Lightweight body is also used in aircraft.
Made of aluminum alloy for excellent heat dissipation and fine heat sourcing construction.
LED Standards: H8, H11-H16
Voltage: DC12V-24V
Power consumption: 36W x 2
Emitting Color: 6000k White
Quantity: 2 sets
Lumen: 7600 LM (one side 3800 LM)
Compatible with car inspections, hybrid vehicles, and when using on external vehicles, a separate warning canceller is required.
Regarding product **
We inspect our items by hand before shipping.
If there is an LED light in the event of an impact during transportation,
We guarantee the product within 10 days from the date of shipment, so please contact us by [inquiry email].
The **date is not included from the date of installation, so please check it immediately.
When starting started, the LED may flash even with a small current, but this is not applicable.
Only non-LED light will be replaced.
Differences from the image and cannot be installed due to a wrong standard, or submersion will not be included.
Please check the images to confirm the product status, so please save them with images or videos.
For clear transaction confirmation and to prevent trouble.
If you have any inquiries, we will respond to [e-mail only].
We do not support phone calls at all, so we ask you for your cooperation.
Regarding returns and refunds
For any reason, return or refund is accepted within 10 days of the shipping date.
In that case, please contact us through the [Inquiry e-mail].
The return shipping fee is the responsibility of the customer.
※If you return the item for a refund, it will be refunded with the payment fee.
Precautions
We do not guarantee any costs other than the product of the rent.
If you cannot install it due to the interference, please install it with the process of the vehicle, etc. Be sure to check the spaces near the unit.
Depending on the vehicle installed, if you have a negative control car, you will need to connect the coupler in the opposite direction. In this case, connect the coupler to the other end. In that case, if the connection part is loose, please fix it with waterproof tape.
We do not guarantee any costs other than the product, such as the lenses are fog or droplets.
In addition, please check the images to confirm the condition of the product.
Please be aware that instructions are not included.
Please be aware that there may be small scratches or other small scratches.
When purchasing, you agree to all the described details and we will make a transaction.