The 200 series high-ace rear heater unit can be set with a dedicated controller, allowing automatic control.
Product Features:
The temperature setting can be adjusted from 18 degrees to 32 degrees with a dedicated controller at 0.5 degrees intervals, and it can also be forced to output at maximum airflow.
The temperature adjustment is done by a unique temperature sensor to monitor the temperature inside the car, and the air volume of the heater fan is automatically adjusted at the temperature setting, so the temperature of the rear heater cannot be adjusted.
Dedicated controller adopts a display part.
It displays the set temperature and displays the room temperature at a glance.
Fan output levels are also displayed in 10 levels from MIN to MAX.
Compatible with both side and floor types.
Can be used for both vehicles with heater units on the side and vehicles on the floor
Please select the product type according to the type of heater installed.
Easy coupler on side mounting type
If the heater unit is on the side, simply connect the coupler on and the body ground.
In addition to the connection of the vehicle wiring, it is necessary to attach the sensor of water and room temperature to the heater unit.
Note:
The temperature of the car is greatly affected by the driving conditions, number of passengers, position of the ride, and the opening of the window, etc.
If you feel the room temperature is higher or lower than the set temperature, please change the installation position of the room temperature sensor and try it.
[Disclaimer
(When purchasing a product, you will understand and agree to the following matters)
■Our products are DIY products that assume "installation by yourself". ■
Installation is required by a dealer or vendor will be determined by the customer, and we cannot guarantee any fee or incidence fees for installation except for significant product defects or our installation process.
If you require installation, we strongly recommend that you ask the installer to fully understand the work and product characteristics before purchasing.
【Agreement Clares】
(In any case there are no rent or other installation costs)
If the product has been installed by a professional without checking the contents of the product received, the manufacturer complaints that it cannot be installed by the vendor, but the rent is already in the vehicle
If you install the product by a professional installer, it does not work due to product defect, but it is still possible to operate at a rate.
Rates when checking for wire contact failure and wiring contact failure after installation
This is a cost to remove the product to confirm after returning the product.
Rates when installing the product again.
In order to install the product, the product costs involved in drilling or other processing in the interior, and the costs associated with this product.
For repairing scratches or damage caused by interior removal, parts fees, and other costs.
Device damage or vehicle damage during product installation
Shipping costs associated with product return (except for items that can be judged for damage or initial defects, etc.)
We cannot guarantee any other incidental rent or installation fees.
With your purchase, you agree to the above.