Feature

●Product Code: 23004-AT001
●Specifications: Product Name: I-Sectional Stovetop, Engine Type: FA20, Displacement: 22 pins, Bowling and Honing Processing: No Need Full Flow Processing: Not Required
●Note: Forged I-section
●Images are for reference only


Description

Product description

Displacement kit with feedback from the know-how cultivated with D1 and Chikanami Time Attack.

Born from analysis and experiments, this product is made in Japan.

Supports high output of 550 (ps)-50 (kgf/m) or more.

We will answer the needs of those who want to feel the inside of the engine.

Features

POINT-1 Piston Kit

• We use special forged material while making sure that we are not forging. .
• By replacing the gasket, it can be used by both NA and overcharged users.
• From strength analysis and tests to high output, the compression ratio has been adjusted to increase the width of the setting and contributing to high overfeeding.
• In consideration of the original direct spray, the top shape has been recreated into a 3D shape.
• The original piston will show off the skirt when the bottom edge, making it suitable for the short model.
• The short height shape is friction and lightweight, and the appearance is meant to be real.

POINT-2 Stovetop

• A special forged cocker rod is set in conjunction with a long stroke setting. The engine side processing is eliminated, and the crank pin size is a dedicated size.
  You will need to purchase a separate metal (for Nissan RB26 & SR).
• The high strength I-section shape is a cocking type, and the conrod bolt size has been revised and corrected.

POINT-3 Crankshaft Stroke 90.0mm

• Adopts special HKS forged material crank.
• To make a stroke up, please select a specific pin journal size through analysis and examination.
• Each weight shape is designed with balance in mind, so it has a shape that is without waste.

POINT-4 Normal Bore Compatible with φ 3.4 inches (86.0 mm)

• It uses a genuine bore size that does not reduce the strength of the block which is part of the engine performance.
• Even in terms of cost, you can reduce the cost of the parts and processing costs required for lining processing.

Please check the following manufacturers website for your specific vehicle, engine model, year, and more.
https://www.hks-power.co.jp/product/engine/capacity/fa20.html
https://www.hks-power.co.jp/product_search/product/724

Legal Disclaimer

この商品はメーカー取り寄せで3-4日後の入荷発送になります。　但しメーカー欠品の場合、多少時間がかかる場合があります。（１ヶ月以上かかる場合もあります。）　お急ぎの際は納期確認の上、ご購入をお願いします。