■ A mini van and K car that is currently in break. But no matter how you are in a break, it is normal and cool.
■ Lowdown if you want to look cool at the beginning!
The problem is that the rigit sass characteristics made from Lateral rods commonly used in minivans and K cars.
Lower the height of the vehicle will lead the rear suspension to either the left or right.
The cause is a lateral rod that is transferred diagonally between the left and right suspension to accept lateral rigidity.
■ The Lateral Rod developed by RS☆R allows you to adjust the length of the rod while the link joints on both ends are attached to the body, so you can adjust the length of the rod freely according to the down width.
■ Before purchase, please check the vehicle model, engine model, drive system, year, grade, etc. with the vehicle verification and cotion plate, etc.
Please check the manufacturers website below for compatibility.
In addition, depending on the model you are installed, please be sure to check warnings and if there are other parts needed.
The posted images may be a sample (image),
Please note that actual product (including specifications) may differ from the product image.
Manufacturer website: http://www.rs-r.co.jp/products/lateral/index.php#
For S320G (17/5 - 19/8) vehicles, you will need to check the bolt diameter on the axle side. Can be installed if the bolt is 0.6 inch (16 mm). If the bolt diameter is 0.8 inches (20 mm), use the S321G (LTD0005B)