Feature

●The 4200 series nitrogen gas spring has a spring initial pressure of 42000N, which ensures a long and stable stroke
●The cylinder body has C-shaped cutout on the top, U-shaped cutout on the bottom, and M8 screw holes for easy installation
●The side of the gas spring cylinder has an inflation port that can also be used for pipe connection systems
●Made of alloy material, adopting a one-piece cutting and molding process which is safer and more reliable than pipe welding
●The piston rod has a high hardness after fine processing, and the surface roughness is about 0.02um


Description

1. The top of the cylinder body has a C type notch, the bottom has a U type notch and the M8 screw hole, easy to install.
2. There is an inflation port on the side of the gas spring cylinder, which can also be used for plumbing connection systems.
3. 4200 series nitrogen gas spring has 42000N initial spring pressure for long stroke and stable operation.
4.Piston rod is fine processing, hardness, surface roughness reach ra0.02um.
5. Made of alloy material, adopting an integrated cutting and molding process which is safer and more reliable than pipe welding.

Specifications:
Item Type: Nitrogen Gas Spring
Material: Alloy
Purpose: Mold compressed nitrogen gas cylinder.
Cylinder Diameter: Approx. 95.2mm / 3.7"
Plunger Diameter: Approx. 60mm / 2.4in

Packing List:
1 x Nitrogen Gas Spring

Remarks:
1.Do not use the plunger rod of nitrogen gas spring for fixing. Also, the screw hole on the end of the piston rod cannot be used as a lifting hole.
2. Do not modify the following part of the nitrogen gas spring.
(1) Drilling holes in the cylinder block of nitrogen gas springs, sealing rings, etc.
(2) Piston rod is shortened piston rod Reduces Stroke
(3) Nitrogen gas springs and accessories are added