Feature
●The temperature of the device is usually between 200 and 250 degrees. Power is 110V, 60Hz, 150W
●The adhesive belt can be used to weld V-belt, pentagon, PU round belt, PU tube, plastic strip, etc
●This welder is simple and easy to operate. Good welding effect. The belt is not cut. Handle is not hot, easy to use
●This is a welder that maintains a constant temperature by heating a specific temperature
Description
Product Specifications:
Temperature: 592°F to 552°F (200°C to 250°C).
Power: 110V, 60Hz, 150W
Suitable for: V-belt, pentagon, PU round belt, PU tube, plastic strip, etc.
Introduction:
|
|
|
|
|---|---|---|
WelderThe temperature of the welder is between 200 and 250 degrees.After receiving the product, you can use the belt on the hand to test a few times to determine the suitable welding time.Welding job can be completed well. |
High precision connector.Connected V-slot is on the same horizontal line, high precision positioning. |
Dedicated shearsUsing special shears to cut the belt, the cut opening is more flat.Better welding effect. |
Welding Method (1):
|
|
|
|
|---|---|---|
Step1Step 1 Cut the openings of the belt flat with a pair of scissors. |
Step1Note: If the mouth of the end is not flat, the melting surface of the belt is insufficient, the interfaces are fragile. |
Step2Step 2, Secure the cut thread strap to the connection pliers |
Welding Method (2):
|
|
|
|
|---|---|---|
Step3Step 3, Connect the welder to the power source to melt the belt that is fixed to the pliers. |
Step4Step 4, After the belt is hot melted, place the connecting pliers for 2-3 minutes and wait for the belt connection to cool down. |
Step5Step 5 Take out the belt and polish the joints flat. |
