Features:
Made of high quality materials, durable, high pressure resistance and reliability.
Check the pressure on the low pressure side and add R134A refrigerant to your high performance vehicle or home air conditioner.
High sensitivity, simple valve debugging, safe and reliable, will serve you for a long time.
Safety click for safety to prevent refrigerant leakage.
Precise pressure drop and flow adjustment for proper flow distribution.
You can adjust the connector of the gas tank.
Stable and reliable valve pressure control ensures your safety.
Suitable for both home and car.
Specifications:
Material: Metal, Rubber, Nylon
Hose length: 4.33in (110 mm) (length of 1 hose)
Working Pressure: 800 psi
Burst Pressure: 4000 psi
Hose Connector: 1/4 sae.
Refrigerant pressure gauge range: 0 - 120 PSI
Suggested Range: 20-50 PSI
Color: as shown in the picture
Quantity: 1 set
Usage:
Air Harmoner Fluoride Tube
2. Bottle of R134A Refrigerant 250 Grams
3. Start testing the pressure of the vehicle. Turn the tubular counterclockwise at the end of the tube opener counterclockwise and tighten the refrigerant bottle to the bottle opener.
4. Find the low pressure interface, generally there is a blue or black cover on the left side of the hood and the L is loose.
5. Start the car engine and turn on the AC AC switch on the air conditioner. The blower is open to the fullest. Wait 3 minutes and connect the hose interface to the low pressure end of the car air conditioner.
6. After the hose is connected to the low voltage interface, the pressure gauge will instantly scale display. The hose is connected to the air conditioning system. Pressure gauge indicates the pressure in the system.
If the pressure inside the air conditioning system is low, the direction inside the bottle opener will rotate clockwise and puncture the mouth of the refrigerator bottle, and the bottle folding will immediately counterclockwise. It is on top of refrigerant bottle. Flip up and down and gently shake the refrigerant bottle, and the refrigerant fluid will flow into the system to inspect the scale of the pressure gauge. This is the same with the pressure PSI unit.
If the pressure inside the air conditioning system is normal, turn the stopper clockwise clockwise and tighten it immediately, and then move the port connector of the air conditioning system.
If the bottle is not sufficient after adding, add two refrigerants as above until the external temperature matches the system pressure.
Note:
Please allow 0-1cm error due to manual measurement. PLS Make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package included:
1 x Bottle opener.
1 x Low Pressure Pipe Joint
1 x Multi standard pressure gauge
2 x Hose