Feature

●It is not a pressure weld type but a assembly type (assembly type)
●Popular If you are looking for cheap grating
●Not slippery
●Model Number: KUN25F25 Application: U-Groove Construction: Assembly Material: SS400 Finish: Hot Dipped Zinc Plated
●Load Capacity: T-2 (approx. for passenger cars), Groove Width: 9.8 inches (250 mm), Inner Width: 9.1 inches (230 mm) ("Inner Width + Angle Thickness on both sides) will be the width of the part that touches the groove. Outer Width: 12.2 inches (310 mm), Length: 39.8 inches (995 mm), Height: 1.0 inches (25 mm), Weight: Approx. 26.6 lbs (12 kg), Main Component: I-25, Main Component Pitch: 1.3 inches (33 mm), Cross Bar: 1 piece, Angle: L40 x 40 x 5


Description

Original product of grating specialty store Fujimura Sangyo. It is not a pressure weld type but a assembly type (assembly type).
Model Number: KUN25F25
Use: For U-shaped grooves
Structure: Assembly
Material: SS400
Finish: Hot Dipped Zinc Plated
Load Capacity: T-2 (equivalent to passenger cars)
Groove Width: 9.8 inches (250 mm)
Inner width: 9.1 inches (230 mm) (inner width + angle thickness on both sides) will be the width of the part that touches the groove. )
Outer Width: 12.2 inches (310 mm)
Length: 39.4 inches (995
Height: 25mm
Weight: Approx. 26.6 lbs (1
Main Component: I-bar plane I-25
Main component pitch: 1.3 inches (33 mm)
Cross Bar: 1
Angle: L40x40x5
Note: The actual product may differ from the product depending on your monitor settings.

Load capacity and usage conditions
The weight capacity of this grate is assumed to be used in vertical areas where the tire passes through the grate.
If you use it in any other situation, please use a grate that has a larger load capacity.
Please especially pay attention that the main material may overside in places where the tire is often pivoting on grate.
Furthermore, it is not suitable for use in locations where special vehicles are passed, such as forklifts or towing vehicles.