Feature(may vary by option.)
●Material: Fiberglass mats are the most commonly used reinforcement material in composites. The 8x8 is low density, meaning there are 8 horizontal lines within 1cm and 8 vertical lines
●High fire resistance: The product has a compact structure, high temperature resistance, fire resistance to 176°F (800°C), and higher flame retardant. Double-sided fire retardant, double sided non-flammable, fire retardant, not afraid of high temperature, excellent performance
●【Quality Performance】: Excellent insulation performance, chemical corrosion resistance Insulated and resistant to pulling. The grid structure is concise and the mesh is uniform. Chemical corrosion and aging resistance
●Reusable: Can be reused as long as it is not damaged, and it is easy to operate and convenient to store
●Wide range of uses: Mainly used as a simple initial fire extinguisher for businesses, shopping malls, ships, automobiles, civil architecture, etc. Especially suitable for kitchens, hotels, recreational facilities, gas stations and other homes, restaurants and other places where fire is prone to occur
[25cmx60m Density 8*8]
Description
Fiberglass Cloth
Fiberglass cloth is primarily used in hand lay-up process, fiberglass reinforcement material grid cloth is mainly used for hulls, storage tanks, cooling towers, marine, vehicles, tanks, and construction materials. Fiberglass cloth is primarily used in industries such as insulation, fire retardant, and flame-retardant. It absorbs a lot of heat when burned with a flame, prevents the flame from permeating and allows air to isolate.
Product Density:
8*8 10*10 12*12 14*14
Product Performance:
It will not rot, even if it is filled in the ground, it will not weathered even when placed in the air, not afraid of water, or the sun.
Product Usage:
Mainly used for pipe insulation, flue/exhaust ducts, fiberglass reinforced plastic products, a series of cement plaster and other GRC components, insulation boards, composite boards, moving boards and walls.
Product Usage:
First remove the rust of the pipe, then coat the outer layer of the pipe with appropriate density fiber cloth and asphalt coating or other products normally two or three layers.
Insulation: wrap treated pipes with an insulated quilted or insulated pipe, wrap the outside of the insulated layer with appropriate width and density fiber cloth and then coat with paint or directly wrap with asphalt cloth.