Feature(may vary by option.)
●How to Use: *When attached to the dedicated pillar, it will lock with the release mechanism. Please remove the main unit with the top body of the detach part toward the front. Insert into the hole of the S bar (square bar)
[Left A-388S]
[Right A-387S]
Description
Safe Load → Measured on one side (resting load with bracket fixed to support)
The load listed above uses the Royal ASF-1 support.
When using at 90cm intervals.
When the base is fully assembled.
When using the support AWF-5 is used, it will be 50% of the above load.
Safe load is for reference only.
Please check the condition and condition before using.
And we do not guarantee the load.
From the Manufacturer
FO Bracket 32 (Insert Inside)
Features
This product requires both holes (Z) processing on the opposite pipe.
The image uses the "Right 2 inches A-387S" (50 mm) image.
How to use
How to Use: When attached to a special pillar, it will lock with a release mechanism.When removing the item, please remove the main unit with the top body of the detach part toward the front.Insert into the S bar (square bar) hole for use.
Product Specifications
- For SB-32
- Material: Steel special steel.
- Thickness: t = 3.0mm
- Line thickness: t = 0.1 inch (2.6 mm)
- Processing required (both holes on the opposite pipe)
|
|
|
|---|---|---|
| Royal S-Hanger Bracket for SB-24 A-182S 50mm Chrome | Royal S-Bar Panel Bracket Chrome Right 50mm A-387S | |
| Fitment | S-Bar Mounted | S-Bar Mounted |
| Material: | Steel special steel (3.0t) | Steel, Chrome Plated |
| Fitment | Auto-lock detent, sway stop (NPL) | Auto Lock Lost |
| Size: | 50mm | 50mm |