Compatible weight is about 220.5 lbs (100 kg). Provides strength that can be used with aluminum and FRP boats. ● Re-position mounting bolts, resizing and additional custom reinforced washers eliminate the need for reinforcing boards on most aluminum and FRP boats. The washer also improves the confidentiality of the caulk material greatly increases its effectiveness. 5 modes and 9 patterns can be fixed. The fucronut has been added to secure the bolt, so it will not damage the boat when storing the inflatable boat. It can also cover the bolt, so there is no risk of injury. By fixing 3 parts of 0.3 inch (8 mm) bolts, the installation strength is improved (versus the 1 dolly stays ), and the load on the transom board. It also makes installation easier. (*Important*When fixed in 4 locations with 6 mm bolts, the load on the transom board is increased, but after the load has been changed to 3 places, the problem is almost disappeared.) The Dolly 100S can be used in the following 5 modes and 9 patterns. ★★ ● Normal Transport Mode → Can be transported with the engine down. (Partially not available): Low position fixing mode → 15° fixation that does not interfere with engine operation. Flip-up fixed mode → 5 different angles can be fixed at any angle. Low Center of Gravity Mode: By securing it at an angle, you can lower the center of gravity and carry it. Car Top Mode → Can be transported by reversing the boat, making it convenient for car topping. ★ Comment ★ This boat dolly is perfect for inflatable boats, FRP boats, aluminum bass boats, etc. The image is installed on JES333, but we have changed 3 different items compared to previous models. One is a custom black wheel to match a variety of boats. Black for fearlessness and an excellent fit. Secondly, 17.0 inches (430 mm) short size dolly pipe. This is a low center of gravity for transportation and makes entry to the water easier. In addition, since it is not longer than necessary for flip-ups, it looks great and has greatly improved the experience of combining with your boat. It is also lightweight. The third greatest change is the size of the fixed stay. Can be fixed at 15° 30° 45° 60° and 90° to adjust the position of the tire. At 15°, the appearance of the boat will almost eliminate the existence of the tire. Outstanding coolness. It integrates with your boat and allows for a very smooth boat transport. You can adjust a variety of settings by simply pulling the pin out and plugging it in. The dolly fixes will not interfere with engine operation on most boats and can be installed as is. In addition, the interference of the rod and rigging has been significantly reduced. AFBOAT is a major domestic boat and marine equipment brand. This brand is exclusively sold by some fishing specialty stores without the major mass merchants. The cooperative manufacturer spans a wide variety of companies, including the following several companies. Joycraft, Achilles, Rigger Marine, Aoi Sonic, Arrow Beam, etc.
When using a boat or kayak, please always use a life jacket for safety purposes