Feature

●2 Genuine Lip Skate Replacement Wheels
●Change it and make your own caster board!
●Replace the wheels when they wear and slip
●The driving power is determined by the balance of complex elements such as momentum, gravity and centrifugal force when swinging the main unit left and right
●A separate 0.2 inch (5 mm) hex wrench is required for replacement


Description

Genuine replacement wheel for lip skating



What you need to replace

2 x 0.2 inch (5 mm) Hex Wrench



How to replace

1: Insert the hex wrench into the left and right grooves of the shaft.

2: Secure the left hand wrench and turn the shaft with the right hand wrench inside

It is quite stiff and has a stowed shaft, so you need force.

3: Take out the short shaft (male end), the long shaft (female end).

4:Replace wheels.

Tips are required to pass through the shaft (female side).

If the shaft does not pass through,

Fasten the spacers between the bearings with a wrench.

5:Keep the shaft in place with the left hand wrench.

Tighten up while adjusting shaft with right hand wrench.

Be careful not to overtighten the shaft.

The trick is to tighten while adjusting to a degree that does not loose.

6: Turn the wheel lightly by hand and turn it smoothly, and the replacement is complete.



Product Features

2.5 inches (64 mm) wheels.

Includes 2 pieces.

A separate 0.2 inch (5 mm) hex wrench is required for replacement.

Hex wrench not included.

(From Amazon.co.jp)