Feature

●U-groove bearing: Inner diameter = 6mm, Outer diameter = 30mm, Thickness = 13mm, Groove width = 9mm, Groove depth = 2.8mm
●These bearings are shielded on both sides to hold lubricant
●Chrome steel long life bearing for smooth and low noise
●A b eC1(P0) tolerance, Z1 noise level for general use
●U-shaped pulley bearings fit rail track systems Widely used to drive door and window track and mechanical equipment


Description

Note:
Please refer to the picture and select the right type of bearing (whether there is a seal or shield on either side of the bearing before ordering). The suffix attached to the bearing is only to distinguish the seal and shield type and will not affect the use of the product.

Description:

Single row, pre-lubricated, normal accuracy
Deep groove ball bearings are one of the most widely used rolling bearings. Used to accept radial and axial loads.
It has low friction, high speed limit speed, cost effective and low maintenance.
Made of heat treated chrome steel (GCr15) that provides high even hardness and abrasion resistance.
It can be used to build track systems and replace wheels, and is widely used for door and window track or driving mechanical equipment.


Selection Guide:
Shield (suffix Z/ZZ) - Fast Protects against dirt and foreign objects
Shield (RS/2RS) - Sheet Steel Nitrile Butadiene Rubber (Oil and Liquid Resistant) Lower limit speed than sealed bearings.

Specifications:
Shield Type: Double Shield
Inner wheel/Outer wheel material: Chrome steel (GCr15) / Nylon
Cage Material: Stamping Steel
Accuracy level: P0a b eC1