Feature(may vary by option.)

●Size: 6000RS (Inner diameter = 10mm, outer diameter = 26mm, thickness = 8mm)
●Sealed on both sides of bearing to hold lubricant Suitable for complex environments
●Made of carbon steel, durable and deformable under heavy load
●ABEC Tolerance 1 (P0), Z1 Noise Level for Most General Applications
●Same as 6000-2RS / 180100 Pre-lubricated and easy to maintain

[10mmx22mmx6mm]

[12mmx24mmx6mm]

[10mmx26mmx8mm]

[12mmx28mmx8mm]

[10mmx30mmx9mm]

[15mmx28mmx7mm]

[9mmx24mmx7mm]

Description

Note:
Before ordering, please refer to the picture to select the correct type of bearing (either side or single side of the bearing) Add a suffix to the bearing only to distinguish between shielded and shielded type bearings. It will not affect the use of our products.

Description:
Deep groove ball bearings are one of the most widely used rolling bearings. Suitable for all kinds of industrial equipment, micro motor, small rotating motor, office equipment etc. Deep groove ball bearings with small friction and upper speed are cost effective and require little maintenance. These cost-effective bearings are widely used in areas with low hardness requirements. Single row, pre-lubricated, normal accuracy

Selection Guide:
Shield (Specified Sufix Z/ZZ) - High Speed Protects against dirt and debris Sealed (specified Sufix RS / 2RS) - Steel plate reinforced NBR (oil and liquid resistant) Lower speed than sealed bearings