■Product Name: KOSO 6 Type Signus Griffass BWS X FORCE NMAX Crank Case Cover Transmission Cover
■Product Code: TA-KOS-CC003
■Manufacturer: KOSO
■Color: Black/Red
■Compatibility
6TH CYGNUS GRYPHUS [Type 6 Signus Griffus] (8BJ-SEJ4J BKG / 2022-2023)
6TH CYGNUS GRYPHUS ABS [Type 6 Signus Griffus] Taiwan Model (SEH1 / 2020)
·6TH CYGNUS GRYPHUS UBS [Type 6 SIGNUS GLITUS] Taiwan Model (SEH1 / 2020)
BWS UBS [Type 3 Bee with UBS) Taiwan Model (SEH51 BBJ / 2020)
X Force (8BK-SG79J BLB / 2022)
FORCE2.0 Taiwan Model (2022)
NMAX125 ABS [2 type] (8BJ-SEG6J BAL / 2021-2022)
NMAX155 [2 type] (8BK-SG66J BBD / 2022)
■Country of origin: Taiwan
Bearings and colors (Bush Solid) are not included.
Please remove and transfer from the original crank cover, or purchase the generic bearing 6202LLU C3 or the following Yamaha original part number before installing.
Bearing "Taiwan Yamaha Genuine Type 6 Griffas BWS X FORCE NMAX Crankcase Cover Bearing 933A6-202Y8 (933A6-202Y0)"
Color: Genuine Taiwan Yamaha 6 Type Griffas BWS X FORCE NMAX Crankcase Cover Color Bush Solid 90380-10800"
Please use a vice force to press the bearing and the color.
If the bearing is removed from the original crank cover, if there is no bearing puller, please heat the bearing around with a heat gun or other similar and tap it lightly to remove it. Please note that overheating may damage the bearing seal and the grease will flow out.
When installing, heat the bearing pressure around the hole with a heat gun, etc., and match the bearings that were cooled in the freezer to the hole.
Putting a washer of the same diameter as the bearing outer shell and lightly tap it to enter.
Please use the circlip removed from the original crankcase cover.
Made of resin and lighter than genuine aluminum.
Gasket not included. Please prepare the original gasket for this product "KSO 6 Type Sigus Griffas BWS X FORCE NMAX Crankcase Cover Gasket" or Genuine Gasket.
The large diameter of the duct creates a high cooling effect, but when driving in rainy weather, rain water etc. may enter in.
The optional PVD titanium coated bolt is just the right place. "Heat-Titanium" Bolt Set for Koso 6 Type Sigus Griffass BWS X FORCE NMAX Crankcase Cover
The color of the product may look different from the actual product due to the shooting conditions, lighting conditions, or viewing environment (PCs monitor or smartphone).
Depending on the production lot, the specifications, engraving, design, color, and packaging may change without prior notice.