Feature

●USB 3.2 (10 Gbps) for ultra-fast transmissions. RAID case for both Type-A/Type-C
●USB 3.2 Compatible RAID Case with 2 2.5" HDD/SSD
●RAID0 (striping) delivers up to 850MB/s
●Equipped with 4 modes, such as RAID1 (mirroring)
●USB Type-A and USB Type-C cable standard attachment


Description

USB 3.2 Gen2 (10Gbps) Super Speed RAID Case Equipped with 4 modes: RAID0, RAID1, JBOD, and SINGLE Supports SATA3 (6Gbps), UAS mode Equipped with a USB Type-C port and comes with 2 types of cables for USB Type-C and USB Type-A. Remove the lid on the front of the main unit and attach the hard drive to the hard drive mount unit for easy setup. Fanless quiet with no cooling fan.



From the Manufacturer



2.5" HDD/SSD 2 RAID Case

11

22

33

RAID0 (striping) delivers over 850 MB/s

Super fast RAID case with full USB 3.2 Gen2 (10Gbps) performance. It also supports SATA-3 (6Gbps)/UAS (USB Attached SCSI) protocols, allowing high-speed transfer speeds exceeding 850MB/sec. The interface must be compatible with USB3.2 Gen2 for maximum performance.

Equipped with 4 modes, such as RAID1 (mirroring)

Working modes include RAID1(mirroring)/RAID0(striping)/JBOD(spanning)/SINGLE.Set the "DIP Switch" and "Operation Mode Set Button" on the back of the main unit.

■ Backup the entire disc with RAID1 (mirroring)You can rest assured even when it comes to this.

Write on two discs at the same time and save and create a backup

If the disk is fault, you will be notified by buzzer or email notification.You can quickly replace the normal disc without having to turn off the power.Rebuild automatically starts after disk replacement.Rebuild will continue even if the PC is turned off.

RAID Mode

44

55

66

■ Focus on high speed

■ Utilizes disks with different capacities.

■ Discs seperately

Includes two 10Gbps cables with USB Type-A and USB Type-C

77

88

99

1010

1111

1212

1313

Easy to install

Remove the lid on the front of the main unit and attach the HDD to the HDD mount unit.

Compact design that does not get in the way even on a desk

Compact housing measures 3.2 inches (8.1 cm) wide, 5.3 inches (13.5 cm) deep, and 2.2 inches (5.5 cm) high.Space saving and wont get in the way by your laptop.

Aluminum body for firm heat dissipation

The aluminum body with excellent cooling performance and breathable design provides excellent heat dissipation for high-speed rotational hard drives.

Fanless silent design

Quiet without cooling FAN.If you install a SSD that does not have a turn, it can be quieter than using a hard drive.

Low power consumption

The 2.5-inch HDD is designed for laptops and is designed to save power compared to 3.5-inch hard drives, so it can significantly reduce power consumption compared to regular RAID hard drives.

Sleep Ready

If your computer is sleep/sleep or power off, the HDD will spin down to reduce power consumption.

Working Mode RAID1 (mirroring), RAID0 (striping), JBOD (spanning), SINGLE (recognizes two hard drives individually).
Compatible Computer Windows PC and Mac with USB Type-A or Type-C port compatible with USB3.2 Gen1 (5Gbps) or Gen2 (10Gbps)
Compatible OS Windows 10, macOS 10.12 (Sierra) or later. *Supports both 32 and 64 bits. *Please update to the latest version of each OS.
Compatible Disc 2.5 inch SATA HDD, SSD, SSHD *Compatible with 0.3 inch (7 mm) / 0.4 inch (9.5 mm) / 0.5 inch (12.5 mm) thick discs.
Supported File Systems Windows:NTFS, exFAT32 MacOS:OS X Expansion, eXFAT
RAID Controller ASM1352R
Connecting Connectors To computer: USB Type-C to disc: SATA signal 7 pin / power supply 15 pin integrated connector.
Transfer speed (theoretical value) USB to PC (USB): SuperSpeed USB 10Gbps (USB3.2 Gen2), SuperSpeed USB 5Gbps (USB3.2 Gen1) to Disk (SATA): SATA 6.0Gbps, 3.0Gbps, 1.5Gbps
USB transfer method UASP Compatible
Control Switch/Button Power switch, Operating mode setting switch (DIP switch), Working mode set button
LED Power LED, HDD 1/2 status LED
Sleep Ready If your computer is sleep, sleep or power off, the HDD will spin down.
RAID1 Function Auto-rebuild compatible(After disk replacement, rebuild will be automatically started. )
Multiple connections You can connect multiple devices to a single computer for use.
Power Supply Voltage DC +12V/2A (supplied by AC adapter)
External Dimensions / Weight Approx. 3.2 x 5.3 x 2.2 inches (81 x 135 x 55 mm) (W x D x H): Not including protruding parts: Approx. 10.6 oz (300 g) (including HDD mounting unit).

Looking for specific info?