Specifications:
Material: Stainless Steel
Dimensions: Approx. 3.0 x 1.0 x 1.4 inches (75 x 25 x 36 mm).
Color: As the picture show
How to use:
After loosening the screw, pull the V-shaped block along the base of the guide rail rotation to find the desired angle. 2, Using the cursor principle reading values on the principle of the cursor 10 diopters on the main scale of diopters If the "0" line of the cursor is aligned with the "0" line on the main scale, it means that the measuring surface A is parallel to the datum level and B is perpendicular to the datum level.
1) If the cursor is "0", read the scores on the right side of the main dial "0" line, then cursor "0", read the line scale readings (°) (°), counterclockwise with the measuring surface of the A and B () indicating the rotation angle.
If the cursor "0" line of the main scale is to the left, the degree will be read on the "0" line of the cursor and the left scale in the "0" line of the cursor. Read degrees(°), ()
A and B measure the angle of rotation clockwise around the surface.
(3) Adjust the angle to the target value and tighten the V block and base.
Package List:
1 x Adjustable angle block
1 x Wrench