Manufacturer: TOKI CORPORATION (TOKISTAR) / TOKI CORPORATION (TOKISTAR) Series Name: Constant Current Power Supply for LEDs, PWM Signal Type, Rated Input: AC 100V/AC 200V/AC 242V 50Hz/60Hz 39VA; Rated Output: 700mA Constant Current 11-47V; Weight: 340g Compatible Signal: Inverter Fluorescent PWM signal ( DC 10-12 V 1 kHz); About this power supply: This is a dedicated power source for TOKISTAR LED lighting fixtures. Do not use on other appliances. Do not disassemble or modify This product is not covered under any warranty. Do not conduct an insulation check with a high pressure insulation measuring instrument after wiring. Wipe the product with a soft cloth with a mild detergent. Please do not work while the electricity is connected. Damage the light fixture. This product requires ground work. Ensure D-type (third type) for grounding work. Without ground work may cause electric shock. ■About installation: Please do not overlap power or set it in a densely manner as the ambient temperature will increase. Ambient operating temperature is 0 - 40 degrees Celsius. Please place it in a sturdy place with good ventilation. When installing multiple power supplies, or when combined with a controller, please install it with consideration for heat dissipation. The power unit should be installed so that it does not rotate horizontally or reverse. Please separate the sound lines, antenna lines, ground wires (excluding ground wires of this power unit), and more. If you install two or more units side-by-side, please separate the power supply unit width and pay attention to ventilation. Please keep the light fixture at least 3.9 inches (10 cm) away from the Do not remove the main unit and the included unit. When wiring work, please be sure to ask a construction shop or a qualified person. (The laws prohibited electrician work of ordinary people. Related keywords: LED power supply transformer