Feature(may vary by option.)
●Power and Ground
●Digital Voltmeter with Min/Max Voltage Capture Function
●4mm banana jack
●20 Power Lead
●Authorized Power Probe Tek Dealer
[bule]
[clamshell black]
[carbon fiber]
[green]
[fire]
[camouflage]
Description
Power Probe 3
Prepare to put other tools on the bench. Connecting the power probe tool to your vehicles battery and you will be able to access an amazing variety of diagnostic functions.
What does it do?
Just press the switch to get a hot lead or ground lead instantly. Use the probe tip and ground wire at the same time to turn on the components on hand. Instantly checks component conductivity and identifies positive, negative, and open circuits without repolarizing the hook-up clip. Find shorts without wasting a fuse.
The 5 modes can be used to press the "Mode" button to open each mode
You can choose it by ring it.
Power Probe 3
Power Probe 3 enables users to perform electrical testing anywhere in the vehicle or around the vehicle using a 20 foot cable that connects to the vehicles battery.
The Power Probe 3 is designed to work with the same principle as the traditional Power Probe circuit tester.Use of advanced functions and modes.But understanding them will increase the diagnosis diagnosis.The LCD display displays the voltage level of the circuit, and has a identifier that indicates which mode the circuit is inIn addition, we have updated 5 modes to help you know exactly how the circuit response.
Features:
- Function to power up components ● Audible sound
- Voltmeter ● 12-24 Volt range
- 20ft Power Cable ● Bad Ground Indicator
- Conduction tester ● Short circuit indicator
- Relay and Component Tester
|
|
|
|
|---|---|---|
|
PP3 contacts the probe to the negative side of the circuit in power probe mode. Green Negative" - LED lights up. Low frequency sounds when audio function is turned on. |
Probe the positive circuit when PP3 is in power probe mode Red positive "+" LED lights up and displays circuit voltage measurement.High frequency sound when audio function is turned on. |
1. Connect PP3 to a good battery. 2.Clip the auxiliary ground clamp to the trailer floor. 3. Place the probe at the jack contact, and apply the voltage.This allows you to check the functionality and orientation of the connector or trailer light.If the circuit break force is dropped, contact may be ground up.After you regree the brakes power (15 seconds), press the reset button until you hear the sound of the brakes and reset the first brake. |
|
|
|
|
|
|---|---|---|---|---|
| Power Probe 3 | Power Probe 3EZ | Power Probe 4 | The MAESTRO | |
| Rated Voltage | 12-24 VDC | 12-24 VDC | 12-24 VDC | 9-30 VDC |
| Screen Type | 1 Line LCD Display | Color Multi-Line LCD Display | Color Multi-Line LCD Display | Color Multi-Line LCD Display |
| Circuit Breaker | Manual Reset | Manual Reset | Self reset | Self reset |
| DC Voltmeter | 0-70 VDC | 0-70 VDC | 0-200 VDC | 0-200 VDC |
| DC Min/Max. | Min. and Max. | Min. and Max. | Average, Min, Max simultaneously | Average, Min, Max simultaneously |
| AC Voltmeter | 0.1 - 70.0 VAC (peak - peak) | 0.1 - 70.0 VAC (peak - peak) | 0.01 to 199.9 VAC (RMS or Peak Peak) | 0.01 to 199.9 VAC (RMS or Peak Peak) |
| AC Min/Max. | No. | No. | Average, Min, Max simultaneously | Average, Min, Max simultaneously |
| Resistance Meter | No. | No. | 0.1-10K Ohm | 0.1-10K Ohm |
| Frequency (HZ) | No. | No. | 1 Hz - 9999 Hz / PW. | 1 Hz - 9999 Hz / Duty % / PW |
| Injector/Driver/ECT Test Mode | No. | No. | Yes | Yes (waveform display) |