Photocromic Hydrophobic Visor Insert is made from a unique photocromic film with the best transition performance. It is also coated with hydrophobic layer.
Smart design makes it easy to apply to most single curved helmet visors on the market. No pins or special tools required to apply this photochromic hydrophobic visor insert. Remove from the protective film, apply the insert to the helmet visor, and remove the mask! So you can drive without glare.
1. Remove the visor insert from the protective film
2. Press the visor insert with both hands to fit the visor Insert the visor in the correct position of the helmet visor.
3.Need to fix visor insert. Press with the fingers of another hand to seal the visor insert.
4. Peel off the masking.
Principle of Photochromic Hydrophobic Visor Insert:
Photocromic Hydrophobic Visor Insert is made from a proprietary photochromic film that has the highest transition performance. The round glue on the back seals directly to the face of the helmet visor, creating a small, airtight double shield.
WARNING:
1) Photochromic Hydrophobic Visor Insert is made from polycarbonate based film. It is not soft on the edges. When firmly press the round adhesive on the surface, please use soft cloth to protect your fingers.
2) Step 2 Find the comfortable position. Do not push the round adhesive into place until you adjust it to the correct position.
3) After adjusting to the correct position, press the round adhesive firmly. To create a small, airtight space between the insert and visor.
4) Please wipe the visor insert with pure water, light hand wash soap and soft cloth. We recommend air drying both visor insert and helmet visor.