Manufacturer Name: Yuko Corporation
[Features]
The fiber resin feet from the shaft have been attached to the shaft with sintered beads of artificial grinding.
The feet are made of nylon resin and have a high elasticity, so you can polish the inner surface of the work and the inner surface of the uneven work.
[Uses]
Materials of SC (silicon carbide) work are relatively hard (cast iron, carbon steel, hardened iron, etc.)
AO (alumina oxide) work material is relatively soft (aluminum, stainless steel, copper, etc.) #60, 120, 180, primarily for deburring #240, 320, 600, primarily polishing #1000 (for mirror finishing) (#20, #40, #80, #40, #80, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #40, #400, #400, #400, #400, ##800, is a custom made product.)
Specifications:
Product Name: YUKO Flex Horn #AO120 AO120
Product Number: BC-76.0_AO120-AO120.
Total Length: 8.0 inches (203 mm).
Applicable inner diameter: 2.8 inches (72.0 mm) 78.0
Grinding grain: Aluminum oxide
Shaft Diameter: 0.25 inches (6.3 mm)
Grinding grain length: 3.0 inches (76 mm)
Shaft Diameter: 0.25 inches (6.3 mm)
The number of revolutions varies depending on the work? Used between 1200 rpm
The working time may vary depending on the material of the work and the purpose of use, but it is an estimate. 20 seconds, 1 round and back movement in 2 seconds.
The grinding fluid uses a solution (solution type) or spindle oil
[Material/Finish]
Abrasive grain: silicon carbide / Shaft: galvanized wire / Brush part: nylon
Weight: 8.5 oz (245.000 g).