Features
1. Made of stainless steel, it is beautiful and easy to clean.
2. Heating angle can be adjusted up to 45 degrees Celsius and up to 75 degrees elevation.
Instructions
1. To insert into a heating element, use only an insulated handle, inferior needle, or any other non-sharp object.
2. It is necessary to regularly check the inner surface of the heating body, especially the heating bodies, to ensure there are small cracks. If there is a small crack, please replace the heating element.
3. The burning retention time of the injection, inferior needle and other objects in the heating ring should not be too long to heat the handle and shorten its service life.
4. The switch is drawn into the "high" file, and the sterilization temperature is continuously used at 825 degrees Celsius. After more than 3 hours, a "drop" sound will sound every 60 seconds. After 3.5 hours of continuous operation, the sterilizer will automatically stop heating up. The two indicator lights flash quickly to extend the life of the heater.
5. Pay attention to the power voltage of the network. If the output voltage of the network power exceeds 10% of the limited voltage, turn off the power and stop using this device.