Feature(may vary by option.)
●This acrylic hook knife tool is specially used for cutting acrylic sheets or other plastic sheets. It is hard and brittle. This hook knife helps to hook thin grooves into acrylic sheets and can break acrylic sheets along the grooves
●Acrylic boards and other plastic plates are hard but hard to split This hook knife will help you hang a thin groove on the acrylic sheet and break the acrylic sheet along the grooves
●1. When splitting the acrylic, please mark the board with a pen first, then use a long, straight steel ruler or wooden strip to position it according to the marking. 2. Next, use a hook knife to make a groove on the acrylic plate along the steel ruler or the edge of the wood. You need to press the steel ruler with your left hand and hold the hook knife with your right hand. 3. There is a protrusion on the back of this hook knife, put the hook knife under the acrylic board, align the protrusion of the hook knife into the groove that was just hung on the acrylic plate and press down both sides. Run through the grooves with both hands and split the acrylic plate slightly along the groove. 4. Fully tear the acrylic board along the groove
●When using the hook knife, please protect the tip of the knife and be careful not to touch the ground. If the knife is not sharp, you can replace the blade
●Includes a hook knife with one blade and a box of blades. 11 blades in total
[yellow Acrylic Cutter]
[Hook blade]
Description
Acrylic Plexiglass Sheet Cutter Hook Knife Tool, Curved Handle makes it more convenient to use. One handle, 11 blades. Can be used to split acrylic sheets with a thickness of 0.4 inches, but it is recommended to use machine cutting if the acrylic sheet is thicker than 0.4 inches. Acrylic board is difficult to cut, please read the description and instruction videos carefully before you start cutting. When cutting, hold the ruler in the left hand to prevent the ruler from moving, but the force of the hand is limited, so professional users can step on the ruler with their feet to cut the acrylic. If possible, we recommend putting your feet on the ruler before cutting it.