The blade has been carefully tempered, and the hardness is approximately HRC56.
This precision nipper is suitable for fine cutting tasks such as electronics and precision machinery.
Delicate oil film effectively prevents rust.
Will not cause circuit failure due to chrome peeling
Polishing
Soft plastic coating
Flush Cut
Mirror Polished
Comfort Handle
35 degree tip
Anti-static type
15 degree tip
65 degree tip
27 degree tip
In narrow spaces, such as printed circuit boards, it may be better to cut from the top.Knipex 64 12 115 ESD Electrician End Cutting Nippers are the answer.Unlike nippers where the blade is on the extension of the handle, the end cutting nipper blade is right angle to the handle.This allows you to work almost vertically against protruding surfaces such as wires, cables and parts.Short Plier Head makes leverage easier and better transfer and adjust force to the blade.
Electrician End Cutting Nippers feature a box joint for smooth operation without any play.The box joint features an inner handle that is guided from both sides by two wide bearing surfaces on the outside handle.This prevents the inclination of the cutting common in the wrap joints, and it will have a good impact on the quality of the cutting and the lifespan of the tool.The entire pliers are oil quenched and the cutting blade is high frequency hardened to over 60 HRC.Low friction two-piece spring is ergonomically superiorIt can be opened and closed gently and stably even after cutting.
Consumer caution as electronic devices may damage parts if sudden discharge due to static difference.With Knipex 64 12 115 ESD Electricians End Cutting Nippers, electrostatic energy is controlled and discharged via conductive handles.The handle is conductive rather than insulated, so you can slowly and safely even charge the charge.Knipex 64 12 115 ESD is mirrored instead of chrome plating and has a fine oil film to prevent corrosion.Therefore, the pliers have enough corrosion protection for use in the workshop and regularly reapply the oil film to ensure corrosion protection.Non-chrome plated means no peeling chrome chips fall off over printed circuit boards.
Knipex offers a wide range of end cutting nippers for electronics and precision engineering applications.These products feature the precision, functionality and longevity that Knipex.Professional daily tools require high quality that makes the job simple and safe and can withstand years of heavy work.Knipex tools are forged from high quality materials, machined with high precision in state-of-the-art machines, then carefully cured with multi-stage heat treatment.All Knipex Pliers embody more than 130 years of expertise.
6412-115ESD | 6412-115 | 6411-115 | 6401-115 | 6402-115 | 6422-115 | |
---|---|---|---|---|---|---|
Handle Specifications | Anti-Static Handle | Comfort | Plastic coating | Plastic coating | Comfort | Comfort |
Style | End Cutter | End Cutter | End Cutter | End Cutter | End Cutter | End Cutter |
Cutting surface | Small umbrella shape | Small umbrella shape | Small umbrella shape | Umbrella | Umbrella | Small umbrella shape |
Cutting capacity (soft wire; φ mm) | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 0.8 |
The blade has been carefully tempered, and the hardness is approximately HRC56.
This precision nipper is suitable for fine cutting tasks such as electronics and precision machinery.
Delicate oil film effectively prevents rust.
Will not cause circuit failure due to chrome peeling
Polishing
Soft plastic coating
Flush Cut
Mirror Polished
Comfort Handle
35 degree tip
Anti-static type
15 degree tip
65 degree tip
27 degree tip