[SMP-21]
[SMP-23S]
Tube Pump SMP-21 Compact and Versatile Dispensing System. The S type uses a cassette type tube case with rapid switch for easy tube replacement. The switch can be switched forward and reverse to the like, making it suitable for sampling. The tubes are available in 4 different types of silicone , Fermed®, Tigon®, and Versilon (Fulrun®) depending on the fluid used. Silicone, Farmed®, and Versilon (Fulrane®) tubes are autoclave sterilized.
|
|
|
---|---|---|
OverviewUses a cassette tube case for smooth tube replacement. The switch can be switched forward and reverse to the like, and is suitable for sampling. The tube is available in 4 different types of silicone, Fermed(R), Tygon (R), and Versilon (Full Run) depending on the fluid used.Silicone, Farmed (R) and Versilon (Full Run (R) tubes) can be autoclaved sterilized. The contact part is only a tube, so there is no need to worry about contamination. The discharge pressure is 196 kPa (2.0 kg/cm2), so it can be used to transfer liquids to a high position. |
Operation partThe SMP-21S and 23S type is equipped with a rapid switch that allows for maximum discharge while keeping the flow control knob in a fixed position. It can be filled in a short amount of time within the tube pathway just before the recipient. |
Adjust the output volume via external signal (SMP-21S, 23S type).It comes with an external signal input terminal, so you can control the amount of discharge by receiving an electrical signal (DC0 - 10 V) from a computer or various measuring device.Automates injection systems such as reagents. |
|
|
|
---|---|---|
Set of tubes of different sizes (SMP-23, 23S type)The SMP-23 and 23S shape tube heads have 3 heads so you can set different materials and different sizes of tubes in each tube case. |
The tube set has a single touch.1. Lift lever and remove tube case cover. 2. Attach the tube to set the tube case cover. 3. Turn down the lever and done. |
Adjuster SetIf you use the adjuster set, you can use commercially available tubes (outer diameter of 0.2 inches (5 mm)). |
Tokyo Chemical (EYELA) Quantitive Supply Pump Cassette Tube Pump | Tokyo Chemical (EYELA) Quantum Supply Pump Peristaltic Tube Pump | Tokyo Chemical (EYELA) Quantum Supply Pump Peristaltic Tube Pump | Tokyo Chemical (EYELA) Quantum Supply Pump Peristaltic Tube Pump | Tokyo Chemical (EYELA) Quantum Supply Pump Peristaltic Tube Pump | |
---|---|---|---|---|---|
Series | SMP-21, 21S, 23, 23S type | MP-2000, 2010, 2100, 2110 | MP-2001 Type | MP-3000, 3100 | MP-4000, 4001 |
Features | Uses a cassette tube case for smooth tube replacement.The switch can be switched forward and reverse to the like, and is suitable for sampling. | Tube pump standard, stable flow rateRoller set with high discharge pressure and stable flow rate. | Spring-loaded tube case for reduced tightening adjustmentsSpring loaded tube case for easy set up | Wide flow range, digital RPM display for superior reproduction.Wide flow range of 0.06 - 1,450 mL/h | Equipped with flow rate conversion display, digital LCD display settings.Supports programming and interlinking with external devices |