Axle Slider
Details
Axle Slider
Anodized aluminum
Rear Slider Body, 2 Pieces (Compatible with vehicles with shaft diameter 0.5 inch (12 mm) vehicles).
Shaft and nut not included.
Installation and instruction manual not included.
There may be scratches, corrosion, etc. during manufacturing and transportation.
The axle sliders are precision machining processing. Slight cut marks are visible on the surface. Please be aware that the cutting marks may differ depending on the product.
Precautions
We do not apply any **in the event of a defective installation by the customer and we will not be covered by the warranty.
If there is any problems that result from working by people other than a motorcycle shop (mechanics of the shop), we will not be covered by the warranty, so please ask your local motorcycle shop.
In addition, if you contact us about the installation, we will not be able to answer the product. If you have any questions, please consult your local motorcycle shop.
About Installation
Loosen the nut on the axle shaft.
Place the center stand or maintenance stand to float the rear tire.
Remove the axle shaft.
Attach the axle slider to the vehicle by passing the axle shaft.
Attach the nut side through the slider through the axle shaft as well as the nut side.
Pull the stand down.
Tighten the axle shaft.
Make sure the slider is tightened and the operation is confirmed and the operation is complete.
In order to prevent accidents, please make sure to check if the bolts are tightened after the work is completed.
Please be sure to read the "Delivery Profile" and "Help" before placing your order. [Seller profile] → https://www.amazon.co.jp/sp? _encoding=UTF8&asin=&isAmazonFulfilled=&isCBA=&marketplaceID=A1VC38T7YXB528&orderID=&seller=A1JEBN1HBZMXPO&tab=&vasStoreID=