Nintendo 2DS "Top and Bottom Set" for Models
[9H hardness equivalent to tempered glass with blue light cut clear gloss LCD protection film]
◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
● The same surface hardness as glass, so it has a hard coat that is resistant to scratches.
Surface hardness equivalent to glass (8-9H), which is scratch resistant and protects the LCD screen.
Cuts blue light significantly
Made in Japan, it cuts blue light by about 30%.
Glossy type that reproduces the LCD screen vividly
The transparency of the screen is about 92% transparency, giving you a beautiful and vivid display.
● The surface of the film is smooth and does not interfere with operability.
The smooth texture of the fingers allows for smooth maneuverability.
● Special silicone resin allows air bubbles to be removed naturally.
Repels well.
Silicone self adsorption, easy to apply and leaves no residue when removed.
Low self-adsorption force due to temperature.
● Includes a spatula and cleaning cloth to remove air bubbles.
◆◆◆◆Notes before purchasing◆◆◆
Before removing the release film, please check the size, peel off the release film slightly, and align it before pasting.
Peel and stick the release film at one time to make a lot of bubbles easier.
Dust and dirt may cause air bubbles. Please clean the screen before applying.
Please be careful not to press the LCD screen firmly when installing it, as there is a risk of damage.
We are not responsible for impacts or damage to your device due to drops, etc.
◆Notice◆
If your device has curved screen, the curved part is not covered.
In that case, only the flat portion of the device is protected, and the curved surface will not be protected.
If the LCD is flat with no curved surface, this is not limited to this.
Fingerprint authentication on the screen is recommended after the film is applied. Sensitivity may be dull.