Feature

●4. Turn the fluoride filter inside out and call water on the other end (reverse water flow). Repeat step 3-5 until the water is clear from both directions
●2. Place the rubber priming button (tan) on one end of the fluoride filter, and align the filter hole with the rubber washer hole. Press the priming button onto the sink faucet and the water call button creates a seal between the faucet and the fluorine filter. Place your thumb on top of the faucet to add pressure to increase the seal (see photos)
●1. Wash the outside of each fluoride filter element with water and mild dish soap and rinse. Remove both blue caps from both ends of both filter elements with clean hands
●3. While pushing the call water button into the faucet, slowly release the cold water, fill the filter cavity and let the water flow through the other end. Flush water for at least 30 seconds or until the water becomes transparent
●5. To ensure that the filter is fully holded, collect the filtered water into a clear glass and check whether the turbidity of the water is lost by the light. Otherwise, it will continue to call water until the water becomes transparent. This filter is primed and ready to install. Repeat priming steps 1 to 7 for each additional fluoride filter


Description

Roisin Material: Plastic
Color: White

Package Includes:
2 x Water Filters (Due to different batches, product components may look different but will not affect use)

Package contents above and other products are not included here.
Note: The color and size of the actual item may vary slightly from the color and size on the website due to lighting and display conditions. The margin of error for the measurement is 0.4 - 1.2 inches (1