iShoot Lens Bracket Combo IS-LINKER140 Works Separately as Quick Release Plate or Clamp
Or as a tripod mount ring for landscape & portrait photography.
How to install:
1. Install the IS-JZ140 from the back and screw alternately.
2.Install QS-120 with bracket to IS-LINKER The bracket can slide up and down to adjust the height according to the size of the lens.
3. Install the quick release plate QS-60 on the bottom of the camera.
4.Fix the mounted bracket to the heads. Brackets have an alt groove for RRS/ARCA-SWISS fit.
Note:
I. The shortest length of the corresponding lens should not be less than 12cm (excluding lens hood). The front end of the lens cannot be rotated. Otherwise, it will affect use.
II. Lens hood cannot be reversed to some lenses, and some lenses can only be used after removing the hood. Otherwise, the lens will not move.
Compatible with Canon Lens:
RF 15-35mm f/2.8L IS USM
RF 24-70mm f/2.8L IS USM
EF 16-35mm f/2.8L III USM
EF 24-70mm f/2.8L USM (without hood)
EF 24-70mm f/2.8L II USM
EF 70-300mm f/4-5.6 IS USM
EF 70-300mm f/4-5.6 IS II USM
EF 75-300mm f/4.0-5.6 IS USM
EF 75-300mm f/4.0-5.6 III USM
EF 100-300mm f/4.5-5.6 USM
Compatible with Nikon Nikkor Lens:
Z 24-70mm f/2.8 S
Z 24-120mm f/4 S
Z 28-75mm f/2.8
AF-S 16-35mm f/4G ED VR
AF-S 24-70mm f/2.8E ED VR
AF-S 24-70mm f/2.8G ED
AF-S 28-70mm f/2.8 ED-IF
AF-P 70-300mm f/4.5-5.6E ED VR
AF-S 70-300mm f/4.5-5.6G VR
AF 180mm f/2.8D ED-IF
Package included:
1 x 2-in-1 Clamp & Quick Release Plate IS-JZ140
1 x Quick Release Plate with Bracket QS-120
1 x Quick Release Plate QS-60
1 x Quick Release Plate Clamp Printer IS-LINKER
(Note: Other items in pictures not listed here are for illustration purposes only and are not included).