Function:
1. Can be bent without kinking or crushing. Vendor calibration marks can be bent from 45° to 90°.
2.Lightweight and handheld design makes it more convenient and quick to use, saving time and effort.
3. Suitable for 1/8" (3mm), 3/16" (4mm) and 1/4" (6mm) small tubes.
4.Suitable for automotive fuel piping, air conditioner refrigerant piping. Suitable for bending round copper tubes, aluminum tubes, and copper tubes.
Specifications:
Item Type: Tube Bender
Material: Aluminum Alloy
Color: Blue
Bending radius: 0 ~ 120°
Standard mark: 45 - 90°
Applications: Suitable for 3mm, 3/16 and 6 mm pipes, such as automotive fuel piping, air conditioner refrigerant piping. Suitable for bending round copper tubes, aluminum tubes, and copper tubes.
How to use:
1.Lift the handle of the pipe bander, and place the tube to the correct channel size. Make sure the top of the tube is in contact with the support (Figure 1).
2. Mark the position where the pipe needs to be bent, make sure the handle "0" matches the o" and slowly lower the handle until the "o" matches the desired angle (Figure 2 shows the position of the angle of the 45 degrees). Figure 3 shows a 90 degree angle)
3. If you need to bend it to the left side of the marked position, align the pipe mark to the "L" and repeat the action required to bend the pipe. Place the mark on the right side of the mark, on the pipe "R".
Package List:
1 x Tube Bender.