[Up suspension]

[Up suspension + camber bolt]

[camber bolt]

Product description

Please check the stock before ordering.
※There may be cases where the stock is out of stock at the time of purchase.
Important Note: Please read the warning (disclaimer)

Toyota S321M Pixis Van 2WD
EAGER UP SUS-Model Lift Up Spring Kit

Easy lift up! Supports vehicle inspection. The hoodie is treated to resist rust. Iron phosphate coating treatment.
In order to prevent rust from springs caused by snow, rain, sea wind, anti-freeze, etc.
The UPSUS has been powder coated after the parka treatment, which is called iron phosphate coating treatment, so it is more durable.

■Manufacturer: FINALKONNEXION (FINAL CONNECTION)
■Model: EAGER UP SUS(Eagle UPSUS)
■Compatible models: Toyota Pixis Van 2WD
■Model: S321M
■Product Number: PGFK-EUPV321

★Product Details★
■Spring rate
Front: 8.7 lbf/inches (3.7 kgf/mm)
Rear: 7.6 lbf/mm

■ Lift volume (*There may be errors depending on the vehicle.)
Front: 1.2 - 1.4 inches (30 - 35 mm)
Rear: 1.2 - 1.4 inches (30 - 35 mm)

★Product Specifications★
Compatible with normal shocks.
Lift up 1.0 - 1.4 inches (25 - 35 mm)
Parker treated to resist rust (iron phosphate coating treatment).

★Precautions★
·We are not responsible for vehicle inspection.
Please be aware that we are not responsible for any damage or other damage caused by using this product.
·Returns and exchanges cannot be accepted for products that have been processed and installed. In addition, we cannot deal with the insurance of the product installation.
Product packaging, design, color, and specifications may change without prior notice for product improvements or improvements.
Please be sure to install this product by professional contractors and mechanics.
Please store the suspension that has been removed after replacing the car level.
If the height of the car is more than 1.6 inches (40 mm), it will not be compatible with car inspection. Please check at your nearest Light Automotive Inspection Association before inspection.
Specifications such as spring rates and spring dimensions are subject to change without prior notice. Thank you for your understanding.
·The height of the car is measured at the time of the product manufactured by our company, so please only use it as a guide.
Can be installed on 4WD vehicles with 2WD listed. However, there is no vehicle height data because the installation is not confirmed.
The height of the car may differ from the listed data and the actual car due to the grade, mileage, vehicle differences and measurement errors.
The spring rates are improved to increase the height of the vehicle, so you may feel a lot of spring rebound force.
Since it uses genuine shocks, it becomes a positive camber from approximately 1° to 1.5° due to the increased height of the vehicle. Please use commercially available "camber bolts" to adjust it.
The UPSUS will be stretched out of the original shock, so due to differences in road surfaces, the piston on of the shock may interfere with the upper side of the shock inside and there may be some roughness and noise.
Every series rear hosing differential cars have a heavy defense weight, so there are many flats on the left and right depending on the difference in the road.

Legal Disclaimer

As this product is sold in our online shops and stores, there may be cases where there are cases where the stock is out of stock.
If you are rush to purchase this product, please check the product stock in advance.
※In the event that the product is out of stock, it is inconvenience, but the customer must ask for cancellation request for your order.
Orders are made at any time and may differ slightly in stock time. (It may slow even if it gets soon.)