Only for GARMIN VIRB ULTRA 30 models.
[9H hardness equivalent to tempered glass blue light cut clear gloss LCD protection film]
◆◆◆◆◆◆◆◆◆◆
● The same surface hardness as glass, so it is hard coated for scratch resistance.
The surface hardness is similar to glass (8 - 9H), which is resistant to scratches and protects the LCD screen.
● Significantly cut blue light.
Made in Japan for peace of mind, it cuts blue light by about 30%.
● Glossy type that reproduces the LCD screen.
Reproduces a beautiful and vivid screen with high transparency of approximately 92%.
● The surface of the film is smooth and unobstructed to maneuverability.
Smooth operation is achieved with a smooth texture.
● Made of special silicone resin that naturally removes air bubbles.
·It has excellent removability.
Silicone self-adsorption makes it easy to apply and leaves no residue when removed.
The self-adsorption strength is less due to temperature.
● Includes spatula and cleaning cloth to remove air bubbles.
◆◆◆◆Precautions before purchasing◆◆◆
Please check the size before removing the release film, peel off the release film slightly, and align it before sticking.
Simply peel off the film at once and apply it to create a large amount of bubbles.
Dust and dirt may cause air bubbles. Please clean the screen before pasting.
Please be careful not to push the LCD screen strongly and carefully to install as it may damage the product.
We are not responsible for impacts or damage to your device due to drops.
Please note:
For terminals with curved LCD parts, the curved part is not covered.
In that case, only the flat part of the device itself is protected, and the curved surface is not protected.
If the liquid crystal is a flat surface that has not been curved, this is not limited to this.
For in-screen fingerprint authentication is recommended after applying the film. Sensitivity may be dull.