Bluetooth Cassette Player Tape Machine Auto Flip Cassette Player Walkman Creative Gift
EASY TO USE:
1. Insert the cassette.
2. Connect the speaker or earphone to the device "AUX" or turn on the Bluetooth earphone or speaker.
3. Press the "PLAY" button on the top to hear the cassette playback.
4.When you connect the power supply, the LED flashes quickly and the device will search the Bluetooth receiver. Turn on the Bluetooth earphone or speaker, pairing successfully after a few seconds and the LED will flash slowly. And you will hear the sound from the Bluetooth receiver.
Additional Bluetooth steps:
1, After connecting the power, the device will start searching the Bluetooth receiver and the LED will flash quickly.
2, Usually the device successfully pairs after a few seconds and the LED will flash slowly.
3, If you do not turn on the Bluetooth receiver, or for other reasons, the device will not pair for about 3 minutes, stop search and the LED will turn off.
4, When the LED is off, you need to start searching the Bluetooth receiver again when the LED is off.
Specifications:
Bluetooth: 4.2
Effective distance: Approx. 16.4 ft (5
Support A2DP, AVRCP, AVCTP, AVDTP, HFP, SPP, SMP, ATT, GAP, GATT, RFCOMM, SDP, I2CAP
Signal Noise Ratio: >90db
Frequency Range: 2.402GHz - 2.480GHz
Audio Channel: Stereo L/R
Audio Input: Cassette tape.
Audio output: 3.5mm earphone jack, Bluetooth transmitter
User Interface: Control Button: PLAY, STOP, FF, REW, DIR Auto Reverse Switch, Volume Control
Power Supply: 2 * AA batteries (not included) or USB port power supply (5V DC adapter)
LED Indicator: Quickly flash when you search the Bluetooth receiver, and it will flash slowly when pairing successfully.
Bit Rate: 128 Kbps
Dimensions: 4.4 x 3.3 x 1.3 inches (113 x 85
Weight: 6.3 oz (180 g).
Package Includes:
1 x Bluetooth Cassette Player,
1 x USB cable,
1 x Earphone
1 x User Manual