Feature

●EXQUISITE MODULE WITH EXCELLENT MAGNIFICATION PERFORMANCE: AD623 modules are engineered with precise details to provide excellent amplification performance. Accurate and reliable amplification of the signal is guaranteed and suitable for a variety of applications from audio amplification to sensor adjustment
●Good Detection of Weak Signal: AD623 module is excellent for detecting and amplifying weak signals. Capture and amplify even the smallest signals making them ideal for applications where sensitivity is critical to medical devices and scientific research
●Suitable for low power and low voltage applications. AD623 operates on a single power supply and is recommended to be used over AD620 for actual use. This is a rail-to-rail opp amplifier, but its power range (± 6v@max) is smaller than the AD620 power range (± 18v@max). For this reason, the AD623 is especially suitable for integration in low power and low voltage applications where efficiency and power saving are a priority
●Minimal internal bias adjustment: Unlike AD620, the internal bias of AD623 is significantly smaller. While debugging the module, AD623 was observed that it normally does not require bias adjustment. AC signals are basically symmetrical to zero points which simplify the setup process. In contrast, AD620 often requires special bias circuit adjustment to remove DC components and achieve zero point symmetry
●Bandwidth Characteristics: AD623 and AD620 vary in bandwidth AD620 provides slightly wider bandwidth compared to AD623. Bandwidth determines the frequency range where the amplifier can effectively amplify the signal. Both modules provide enough bandwidth, but AD620 may be suitable for applications that require amplification of high frequency signals


Description

Specifications:
Condition: Brand New
Item Type: Voltage Amplifier Module
Material: Metal
Color: As picture
Module Size: Approx. 50x50mm/2.0x2.0"
Weight: Approx. 35g
Module Power: 5V-24V is not problem, but it depends on the output of the baby distribution voltage (if the customer needs output 5V voltage, the Ad62x series chip is about ±3.8V power supply, and it is the voltage difference of itself), it is recommended to use a single power supply higher than 12V )
Module Bandwidth: For high gain, AD620/623 is less than 50khz, low gain, Ad620/623 is more than 1mhz
Module Input Signal Type: Single End Signal or Differential Signal
The maximum amplification rate of the module is more than 2000 times (actual measurement). It is recommended that you use multi-stage amplification to achieve high gain, as gain assembly will increase the waveband fluctuation.
Module Saturated Output Amplitude: AC peak is 10vpp (±5vpp)
Fixed Output Voltage: 5v~10v (Factory default: 5v)

Package List:
1 x Voltage Amplifier Module
1 x Pin Header
4 x Copper Cylinder Screws
4 x Screws