Feature

●Balance: If the default position is tilt 90 degrees back and forth, the tolerance of the device is ±1mm
●Internal Impedance: 650Ω±10% Insulation resistance: more than DC500V + 50mΩ of case and circuit
●Zero Position: Uses the default position of the device. The point of the tip of the guide and the center of the zero scale is the reference and the zero overlap scale. Tolerance is +/- 1mm
●Standard test conditions: temperature 44°F (20°C), humidity 70%, and test results even under normal temperature and humidity if there is no difference in the test. Current Sensitivity: Pointer scale range from zero to maximum scale (full scale position) and sensitivity is 960 ± 8%
●Pointers Fastening: When full scale current instantly becomes 3 times of overcurrent and the current reading sensitivity decreases slowly from 1/2, the pointer will go back to 1/3 of the scale. Friction: If current is flowing into the device and slowly increase or decrease to a certain value, the measurement point error range is ±0.04 inch (±1 mm)


Description

Frurdiem Pointer Swing Direction: Left to Right
Needle Length: 44±1mm from center line to end of needle
Pointer Width: 0.45 ± 0.05 mm
Meter Usage Direction: Vertical
Usable temperature range: -14°F to 140°F (-10°C to 60°C), RH 35-85%
Storage temperature limit: -4°F to 140°F (-20°C to 60°C), RH 35-85%
The device should not be placed in direct sunlight and store it in the package to prevent it from entering the device.
Welding conditions are placed terminals at 230°C at 3.5 seconds on a tin plate of about 3 mm and remain in normal condition after this test.
Soldering Temperature: Keeps the soldering iron temperature of 350 degrees Celsius and contacts the terminal for 3.5 seconds, and contacts the terminal tip of about 0.1 inch (3 mm) to the soldering iron. Testing was normal.
ANTI-STATIC: Test the dry nylon cloth on the surface of the transparent cover plate three times in the same direction. The difference between notes is less than 1/3 of the scale length and will return to zero after 3 seconds of return.
Color: Picture Color
Material: Plastic
Size:90x70x35mm/3.54x2.75x1.37inch

Package Includes:
1 x pointer VU meter

Package contents above and other products are not included here.
Note: The color and size of the actual item may vary slightly from the color and size on the website due to lighting and display conditions. The margin of error for the measurement is 0.4 - 1.2 inches (1