Feature(may vary by option.)
●The soldering iron is plug and play, so you can unplug the power supply when not in use and turn off the soldering iron, ensuring safety and energy saving
●The LCD display shows the temperature status more clearly so you dont have to worry about finding the right temperature for each welding job
●Insulated silicone handle, compact and lightweight design, fast heat dissipation, can be used for a long time
●With ceramic technology, the soldering kit heats up very quickly and heats to desired temperature within 20 seconds, so you can get the job started
●Widely used in circuit board soldering, electrical maintenance, production of jewelry and metal headgear, computer and DIY Great for beginners, welding workers, basic household equipment, welding engineer training, etc
[1 S6-3-Blue]
[1 S6-Blue]
[1 S6-Orange]
[1 S6-3-Orange]
[1 S6-Black]
[1 S6-3-Black]
Description
Soldering Method:
1).Determine the appropriate temperature for your project. The temperature you use depends on the material to be joined and the type of solder used.
2).Once the iron is heated to the appropriate temperature, hold the handle in your hand and lift the iron and hold the solder in the other hand. Heat the iron with a hot iron at the point where the two metal parts come in contact with it for about 1 second. You need to heat up the metal parts, not the solder itself.
3).Contact the solder to the heated components. Once the solder melts, it flows into the gap that needs to be filled. Continue sending solder until sufficient amount is melted. A sufficient amount of solder is required to form a solid connection, but too much solder is not desirable.
4).Do not do anything, wait until the solder cools naturally.
5).Check the quality of the solder joints. If the connection is good, the appearance will be smooth, uniform and glossy. Make sure there is no problem gaps between components or excess solder clumps
Warm Tips
1. Please be careful when using the tools. Keep out of reach of children.
2. If you do not use pencil iron, please switch to 392 model. Also, do not continue using the soldering iron under high temperatures.
3. Do not apply too much pressure when welding. As long as the soldering iron tip is fully in contact with the solder joint, heat is transferred.
4. To avoid oxidation, please clean the soldering iron tip after use, and "tin" the solder coating on all sides of the soldering iron tip. If the black oxide coating is adhered to the tip of the soldering iron, remove the stains with a wet sponge. This very beginner iron should be kept in every household basic toolbox especially if you have a variety of childrens toys.