Feature(may vary by option.)
●The soldering iron is plug and play, so you can unplug the power supply when not in use and turn off the soldering iron, ensuring safety and energy saving
●The LCD display shows the temperature status more clearly so you dont have to worry about finding the right temperature for each welding job
●Insulated silicone handle, compact and lightweight design, fast heat dissipation, can be used for a long time
●With ceramic technology, the soldering kit heats up very quickly and heats to desired temperature within 20 seconds, so you can get the job started
●Widely used in circuit board soldering, electrical maintenance, production of jewelry and metal headgear, computer and DIY Great for beginners, welding workers, basic household equipment, welding engineer training, etc
[1 200w]
Description
Product Description:
Temperature range: 180-480
Temperature Offset Range: ±99
Heater: Ceramic
5 Steps Operation
1. Welding preparation: Check the condition of electric soldering iron. Once you confirm correctly, determine the weld location and confirm the type of welding part.
2. Plug in and preheat welding position. Turn on the electric soldering iron and preheat the tip of the soldering iron towards the welding position, for 1 to 2 seconds (preheating time depends on the temperature of the soldering iron used and the temperature of the soldering iron used). Welded Component Temperature
3. Add the tin wire. After the welding position is preheated, hold the tin wire in your left hand and send it to the solder joint position.
4. Remove the tin wire. Remove the tin wire when the tin is melted and meets the requirements of solder joining.
5. The tip of the soldering iron is separated from the soldering joint: After the soldering joint, remove the tip of the soldering iron and place the soldering iron safely on the soldering iron stand.