Feature

●Stable output: The signal to noise ratio of the decoder board is 112db, distortion is 93db, direct output of 2.1V RMS audio voltage, high frequencies without burrs, low frequencies are full, and diving
●【Technical Specifications】: This decoder board does not need connect to MCLK chip internal P LL uptic to produce MCLK clock. This is much better than using an asynchronous clock. The internal PLL uptic is only used to generate the inside of the MCLK clock, and the audio sampling rate will not rise
●【Access Signal】: DAC decoder connects to power source except VCC GND, the rest of GND LRCK DATA BCK connects to I2S signal input
●【Supported Formats】: The decoder supports direct input of I2S format or left-loading signal (requires manual switching) and supports data up to 32 bit at 384K sampling rate
●【Optional Mode】: DAC decoder supports two filter modes: normal mode or low delay mode (set by the FLT port on the board)


Description

Specifications:
Item Type: DAC Decoder Module
Material: PCB
Application: Suitable for HX players, players, power amplifier equipment, etc.
Specifications:
SNR: 112db
Distortion: -93db

How to use:
Direct installation and use.

Packing List:
1 x DAC Decoder Module

Note:
Be careful not to reverse connect the power supply. Reverse connection will damage the board. It will damage voltages exceeding 10V. Board