Wiring Method:

1. Pass the rear case, large hole washer and rubber bushing through the cable.

2. Peel off the outer shell of the coaxial cable with reference to the length of the conductor.Can be cut slightly longer.

3. Pass the eyelet washer through the mesh wire.

4. 3) Spread the mesh wire before the eyelet washer and insert the T-shaped parts.

5. Put the mesh wire together lightly between the washer and the T-shaped part, and the T-shaped parts are inserted between the mesh wire and the inner insulator to hold the mesh wire with the washer and T-shaped parts.

6. Cut the insulator of coaxial cable to expose the core line.

7. Insert the conductor of the connector.

8. Put the case on and tighten the screws.

9. Soldered core lines and complete.