Feature

●Nylon Material: The dust collector is made of nylon material, long life, weight about 590g, small size, lightweight, easy to carry and use
●8.9 inches (225 mm), 1.3 inches (32 mm), outer diameter of hood is approx. 8.9 inches (225 mm), hood height is approx. 1.5 inches (32 mm), orifice inner diameter is approx. 1.5 inches (38 mm), outer diameter of the clamp inner round hood can be adjusted from 1.9 inches (48 - 76 mm)
●B-180G: B-180G Angle Grinder Dust Cover for Dust Collecting Hood The high hood is suitable for setting diamond bowl grinder with a center height of about 23mm, easy to use and install, can collect up to 99% of floating dust
●Strong Sealing: The dust collecting hood is surrounded by PU leather ring, which has a stronger seal to prevent dust from overflowing. Works with 180mm or 230mm high power angle grinders and can attach 180mm flap discs, grinding cups, etc
●Application: This vacuum cleaner is a universal dust cover for most angle grinders. Dust free operation is achieved by connecting it to ground concrete dustproof grinding, glass fiber resin plate dust grinding, steel plate scale removal grinding, and dust vacuum device


Description

11
11

11
Specifications:

Item Type: Angle Grinder Dust Cover Material: Nylon Outer Diameter: 8.9 inches (225 mm), Height: 1.3 inches (32 / 38 mm), Pipe Port: Inner Diameter: 1.5 inches (39 mm), Outer Diameter: 1.7 inches (42 mm), Clamp Inner Diameter: 1.9 - 3.0 inches (48 - 76 mm), Suitable for mounting grinding cups with a center height of approximately 0.9 inches (23 inches (23 mm).

Angle Grinder Dust Shroud

7" Dry Grinding Dust Collector Cover Shroud

The dust collector is made of nylon material and has a long lifespan, and weighs approximately 20.2 oz (590 g), small, lightweight, and easy to carry and use.The outer diameter of the hood is about 225mm, the height of the hood is about 32/38mm, the orifice inner diameter is about 39mm, the outer diameter of the Orifice is about 42mm, and the adjustable size of the clamp inner diameter is the whole round hood.

  • Nylon material
  • 225MM, 32/38MM
  • B-180G
  • Strong sealing
11

B-180G Angle Grinder Dust Cover for Dust Collector Hood, the high hood is suitable for the installation of a diamond bowl grinder with a center height of about 23mm, easy to use, easy to install, and can collect up to 99% of dust in the air.

11
11

The area of the dust collecting hood is covered with PU leather rings for an improved seal to prevent dust from overflowing.It can be used with 180mm or 230mm high power angle grinders and can be attached to 180mm flap discs, grinding cups, etc.

11

This vacuum cleaner is a universal dust cover for most angle grinders.Connects to concrete dustproof grinding, glass fiber resin sheet dust grinding, steel plate scale removal grinding, and dust-free operation.