This is a lightweight and compact 75mm wide square filter and CPL filter in one pack.
The Half ND filter has a smooth border and is easy to handle with any lens from wide angle to telephoto with a medium GND0.9 (Half ND8)
You can further step up by adding various ND filters with different density or LPRF (Light Pollution Reduction Filter) for night scenes.
It is perfect for combining with small equipment such as Micro Four Thirds and other small lens front balls, and can build an extremely lightweight square filter system coupled with the compactness of the camera and lens body.
|
|
|
---|---|---|
HT75 75mm Holder + CPLSquare filter holder outer frame for 75mm width and exclusive circular polarizing filter set.The holder is robust and precise and comfortable to operate.The included HT adapter ring comes with 2 types: 67mm and 72mm.Compatible with a wide range of lenses with various HT75 adapter rings sold separately for 39mm to 62mm. The CPL effect can be adjusted with the gear on the frame of the included CPLIn addition, when using or without the CPL can be switched on or off the frame CPL. |
Premium Medium GND 0.9 75X100mmND8 Half ND FilterThe gradient width in the middle is slightly wider and is less visible for boundaries and is compatible with wide-angle to telephoto lenses. |
How to use the frame CPL75mm (included)Insert the entire metal frame into the filter holder slot just like a square filter.To prevent vignetting it is generally recommended to be installed in the front side (camera side) slot.The effect can be adjusted by turning the turning knob on the frame.Even if you change the angle of the holder when used with a variety of half ND filters, the effect can be re-adjusted independently on the frame CPL side. |
The premium coating of KANI boasts optical performance due to the superior quality of SCHOTT manufactured B270 glass and high precision polishing on both sides of the product and the optical performance of KANI. The gradation of the ND is clear even in backlight without unevenness from low concentration to high densities, and the colors are more neutral, suppressed, oil-proof, and dustproof coated, so dirt can be easily wiped off easily.
|
|
|
|
---|---|---|---|
1. Choose the adapter that matches the lens filter diameterThe HT75 holder single piece and 75mm filter set come with an adapter ring for 67mm/72mm filter diameters, so you can choose the one according to your lens. If you want to use with smaller apertures, please purchase a variety of special adapter rings sold separately: 39mm/40.5mm/46mm/49mm/52mm/55mm/58mm/60mm(E60)/62mm. |
2. Attach adapter ring to lensAttach the ring you choose from 1. on your lens to the filter screw on the end of the lens. If your lens protection filter is installed, please take it off basically before attaching it. Wide angle lenses may cause vignetting and increase in filter quantities may cause image quality. |
3. Attach the outer frame of the holder (filter mount)When the outer edge of the attached adapter ring is hooked onto the nail on the outer frame of the holder, the adapter ring is pushed into while adding a nice knob on the holder outer frame. Spring integrates the adapter ring and the outer rim.The outer frame can be rotated freely after fixing. |
4. Install the square filterInsert the square filter into the slot of the holder.Insert the filter into the same slot on the left and right so that the filter side is parallel to the lens surface. Shipment can be used up to 3 pieces at the same time, but basically use them from the slot on the front side (lens side). Because the urethane used for light shielding is attached to the outer frame of the holder, it will be harder than other slots. |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
Traveler Set II 75mm | Challenge Set, 3.0 inches (75 mm) | Starter Set, 3.0 inches (75 mm) | Standard Set II 3.0 inches (75 mm) | Railway Set 75mm | |
HT75mm Holder + CPL | ○ | ○ | ○ | ○ | ○ |
P. Soft GND 0.9 | - | - | - | - | ○ |
P. Medium GND 0.9 | ○ | ○ | - | ○ | - |
P. Hard GND 0.9 | - | - | - | - | ○ |
P. Reverse GND 0.9 | - | - | - | ○ | ○ |
P. Dual Purpose GND 0.75 | ○ | - | ○ | - | - |
ND64 | - | - | - | ○ | - |
ND1000 | ○ | - | ○ | ○ | - |